Florida Department of Education
Curriculum Framework 
Program is daggered.  Last year to report enrollment is 24-25. 

Program Title:	Mobile Electronics Technology
Program Type:	Career Preparatory
Career Cluster:	Transportation, Distribution and Logistics

Secondary – Career Preparatory	
Program Number	9540400	
CIP Number	0647010105	
Grade Level	9-12	
Standard Length	2 credits	
Teacher Certification	Refer to the Program Structure section	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-2096 – Electronic Equipment Installers and Repairers, Motor Vehicles	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose 

The purpose of this program is to prepare students for employment or advanced training in a variety of occupations in the Mobile Electronics technology industry.

This program focuses on broad, transferable skills and stresses understanding and demonstration of the following elements of the Mobile Electronics Industry; technical skills, underlying principles of technology , planning, management, finance, labor issues, community issues and health, safety, and environmental issues.

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Transportation, Distribution and Logistics career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Transportation, Distribution and Logistics career cluster.  This program offers a broad foundation of knowledge and skills to prepare students for employment in network support services positions.  

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of two credits.

To teach the course(s) listed below, instructors must hold at least one of the teacher certifications indicated for that course.

The following table illustrates the secondary program structure:

Course Number	Course Title	Teacher Certification	Length	SOC Code	Level	Graduation Requirement	
9540410	Mobile Electronics Technology 1	AUTO MECH @7 7G
COMP SVC 7 7G
ELECTRONIC @7 7G	1 credit	49-2096	2		
9540420	Mobile Electronics Technology 2		1 credit	49-2096	2		
(Graduation Requirement Abbreviations- EQ= Equally Rigorous Science, PA= Practical Arts, EC= Economics)

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Demonstrate proficiency in acceptable employee behavior in the automotive industry.
02.0	Demonstrate appropriate communication skills.
03.0	Demonstrate proficiency in appropriate math skills as it relates to the mobile electronics industry.
04.0	Demonstrate proficiency in appropriate understanding of basic sciences.
05.0	Demonstrate proficiency in preparing a vehicle for pre/post customer requested installations or services.
06.0	Describe the roles within teams, work units, departments, organizations, inter-organizational systems, and the larger environment.
07.0	Demonstrate leadership and teamwork skills needed to accomplish team goals and objectives.
08.0	Explain the importance of employability and entrepreneurship skills
09.0	Demonstrate proficiency in electrical basics.
10.0	Demonstrate proficiency in evaluating and assessing vehicle power sources.
11.0	Demonstrate proficiency in locating and repairing common installation and electrical problems in automobiles.
12.0	Demonstrate a working knowledge of direct current circuits (DC).
13.0	Demonstrate a working knowledge of alternating current (AC) circuits.
14.0	Demonstrate proficiency in locating and troubleshooting common installation and electrical problems in automobiles.
15.0	Demonstrate a working knowledge of vehicle electrical systems.
16.0	Demonstrate a working knowledge of OBD systems.
17.0	Demonstrate knowledge of basic mobile audio/video systems.
18.0	Demonstrate a working knowledge of security and convenience systems.
19.0	Demonstrate a working knowledge of advanced in-vehicle information and control systems.
20.0	Demonstrate knowledge of basic telematics systems using wireless communications.
21.0	Demonstrate proficiency in evaluating and assessing various circuits in a vehicle where aftermarket components will connect.
22.0	Demonstrate proficiency in the evaluation and installation of basic and advanced automotive audio system elements, enhancements or the replacement of audio system components.
23.0	Demonstrate proficiency in the evaluation and installation of basic and advanced automotive security and convenience elements and components.
24.0	Demonstrate knowledge of a Wireless Local Area Network (WLAN).
25.0	Demonstrate knowledge of lighting systems (i.e. H.I.D, LED, halogen lights).
26.0	Demonstrate a working knowledge of basic installation knowledge and techniques.
27.0	Demonstrate proficiency in the installation of Rear Seat Entertainment (RSE) Systems.

Florida Department of Education
Student Performance Standards

Course Title: 	Mobile Electronics Technology 1
Course Number: 	9540410 
Course Credit:	1

Course Description:

The Mobile Electronics Technology 1 course content includes, but is not limited to, installation, configuration, operation, and maintenance of Mobile Audio/Video Systems; Autosound, Wireless Communications, Security, Navigation, In-Vehicle Information Systems, Safety Systems, Satellite Antenna, and low voltage wiring systems.  Other course content includes, but is not limited to, communication, leadership skills, human relations and employability skills; and safe, efficient work practices.

CTE Standards and Benchmarks	
01.0	Demonstrate proficiency in occupational safety.--The student will be able to:	
01.01	List the level of electricity (shock) considered lethal to humans.	
01.02	Describe safety considerations when working in and around motor vehicles.	
01.03	Apply shop safety rules, EPA and OSHA standards.	
01.04	Explain the measurement and safety concerns of sound pressure level and hearing damage.	
01.05	Identify and use appropriate emergency first aid procedures.	
01.06	Describe the Federal Law as recorded in (29 CFR-1910.1200).	
01.07	Utilize and demonstrate safe procedures for handling of tools and equipment.	
01.08	Identify and use proper placement of floor jacks and jack stands.	
01.09	Identify and use proper procedures for safe lift operation.	
01.10	Utilize proper ventilation procedures for working within the lab/shop area.	
01.11	Identify marked safety areas.	
01.12	Identify the location and the types of fire extinguishers and other fire safety equipment.	
01.13	Demonstrate knowledge of the procedures for using fire extinguishers and other safety equipment.	
01.14	Identify the location and use of eye wash stations.	
01.15	Identify the location of the posted evacuation routes.	
01.16	Comply with the required use of safety glasses, ear protection, gloves, and shoes during lab/shop activities.	
01.17	Identify and wear appropriate clothing for lab/shop activities.	
01.18	Secure hair and jewelry for lab/shop activities.	
01.19	Demonstrate awareness of the safety aspects of supplemental restraint systems (SRS), electronic brake control systems, and hybrid vehicle high voltage circuits.	
01.20	Disable supplemental restraint systems (SRS) in accordance with manufacturers' procedures.	
01.21	Demonstrate awareness of the safety aspects of high voltage circuits (such as high intensity discharge (HID) lamps, ignition systems, injection systems, etc.)	
01.22	Locate and demonstrate knowledge of safety data sheets (SDS).	
02.0	Explain and apply required tasks associated with the proper use and handling of tools and equipment relating to the mobile electronics industry.--The student will be able to:	
02.01	Identify tools and equipment and their appropriate usage in mobile electronics applications.	
02.02	Identify and use standard and metric measurement skills and designation.	
02.03	Demonstrate proper cleaning, storage, and maintenance of tools and equipment.	
02.04	Demonstrate proper use of precision-measuring tools and torque methods.	
02.05	Identify, use and maintain hand and power tools properly.	
02.06	Identify and practice using appropriate precision measuring tools and torque methods.	
02.07	Identify and describe the proper tools to apply and remove automotive fasteners, to include thread repair.	
02.08	Identify and use metric and English measurement skills.	
03.0	Demonstrate proficiency in acceptable employee behavior in the automotive industry.--The student will be able to:	
03.01	Explain the effects of chemical/substance abuse.	
03.02	Identify principles of stress management.	
03.03	Demonstrate acceptable industry dress code.	
03.04	Identify and demonstrate proper customer relation skills.	
03.05	Identify and define payroll deductions (taxes, insurance, and social security) employee benefits and pay systems.	
03.06	Identify principles of time management.	
03.07	Identify acceptable customer relations.	
04.0	Demonstrate appropriate communication skills.--The student will be able to:	
04.01	Write logical and understandable statements, or phrases, to accurately fill out forms and invoices commonly used in business and industry.	
04.02	Read and use graphs, charts, diagrams, tables, parts manuals, and information sources commonly used in this industry/occupational area.	
04.03	Read and follow written and oral instructions.	
04.04	Answer and ask questions coherently and concisely.	
04.05	Read critically by recognizing assumptions and implications and by evaluating ideas.	
04.06	Demonstrate appropriate telephone/communication skills.	
05.0	Demonstrate proficiency in appropriate math skills as it relates to the mobile electronics industry.--The student will be able to:	
05.01	Read and interpret measuring devices.	
05.02	Solve number word problems.	
05.03	Write percent add fractions and decimals.	
05.04	Solve percent problems.	
05.05	Find the percent of a number.	
05.06	Operate a calculator.	
05.07	Understand and use the metric system.	
05.08	Convert inches to millimeters and millimeters to inches.	
05.09	Solve problems for volume, weight, area, circumference and perimeter measurements for rectangles, squares, and cylinders.	
05.10	Measure tolerance(s) on horizontal and vertical surfaces using millimeters, centimeters, feet and inches.	
05.11	Add, subtract, multiply and divide using fractions, decimals, and whole numbers.	
05.12	Determine the correct purchase price, to include sales tax for a materials list containing a minimum of six items.	
06.0	Demonstrate proficiency in appropriate understanding of basic sciences.--The student will be able to:	
06.01	Understand molecular action as a result of temperature extremes, chemical reaction, and moisture content.	
06.02	Draw conclusions or make inferences from data.	
06.03	Identify health-related problems, which may result from exposure to work related chemicals and hazardous materials, and know the proper precautions required for handling such materials.	
06.04	Understand pressure measurement in terms of Pounds per Square Inch (P.S.I.), inches of mercury (inHg) and kilopascals (K.P.A.)	
07.0	Demonstrate proficiency in preparing a vehicle for pre/post customer requested installations or services.--The student will be able to:	
07.01	Identify automobiles according to engine location, cylinders, type of drive system, purpose, etc.	
07.02	Identify purpose and demonstrate proper use of fender covers, floor mats and other vehicle protection equipment.	
07.03	Determine the presence of a Tire Pressure Monitoring System (TPMS).	
07.04	Determine the presence of an air suspension system.	
07.05	Locate and use the Vehicle Identification Number (VIN).	
07.06	Locate and use vehicle information placards, decals, tags, as required.	
07.07	Locate and use technical service bulletins (TSBs).	
07.08	Read and understand manufacturer’s specification sheets, equipment installation instructions and equipment owner’s manuals.	
07.09	Ensure vehicle is prepared to return to customer per school/company policy (floor mats, steering wheel cover, etc.).	
07.10	Use computer and operate keyboard.	
07.11	Identify automobiles according to vehicle identification number (VIN)	
07.12	Utilize flat rate manuals, service manuals, service bulletins, parts manuals and electronic service information.	
08.0	Describe the roles within teams, work units, departments, organizations, inter-organizational systems, and the larger environment.--The students will be able to:	
08.01	Describe the nature and types of business organizations.  	
08.02	Explain the effect of key organizational systems on performance and quality.	
08.03	List and describe quality control systems and/or practices common to the workplace.  	
08.04	Explain the impact of the global economy on business organizations.	
09.0	Demonstrate leadership and teamwork skills needed to accomplish team goals and objectives.--The students will be able to:	
09.01	Employ leadership skills to accomplish organizational goals and objectives.  	
09.02	Establish and maintain effective working relationships with others in order to accomplish objectives and tasks.  	
09.03	Conduct and participate in meetings to accomplish work tasks.  	
09.04	Employ mentoring skills to inspire and teach others.  	
10.0	Explain the importance of employability and entrepreneurship skills.--The student will be able to:	
10.01	Identify and demonstrate positive work behaviors needed to be employable.  	
10.02	Develop personal career plan that includes goals, objectives, and strategies.  	
10.03	Examine licensing, certification, and industry credentialing requirements.  	
10.04	Maintain a career portfolio to document knowledge, skills, and experience.  	
10.05	Evaluate and compare employment opportunities that match career goals.  	
10.06	Identify and exhibit traits for retaining employment.  	
10.07	Identify opportunities and research requirements for career advancement.  	
10.08	Research the benefits of ongoing professional development.  	
10.09	Examine and describe entrepreneurship opportunities as a career planning option.	
11.0	Demonstrate proficiency in electrical basics.--The student will be able to:	
11.01	Identify sources of electricity.	
11.02	Relate electricity to the nature of matter.	
11.03	Define voltage, current, resistance, power and energy.	
11.04	Apply Ohm’s law and power formulas.	
11.05	Measure properties of a circuit using appropriate test equipment.	
11.06	Demonstrate electrostatic discharge (ESD) safety procedures.	
11.07	Read and interpret color codes and symbols to identify electrical/electronic components and values.	
11.08	Solve problems in electronic units utilizing metric prefixes.	
12.0	Demonstrate proficiency in evaluating and assessing vehicle power sources.--The student will be able to:	
12.01	Charge battery as needed.	
12.02	Inspect and clean battery and battery cable clamp connections.	
12.03	Perform battery test using appropriate tester.	
12.04	Start vehicle using an auxiliary power supply.	
12.05	Maintain or restore electronic memory functions if required.	
12.06	Test and replace fuses, fusible links; confirm proper circuit operation.	
12.07	Identify battery by group, type and purpose.	
12.08	Determine the correct battery type to use in a variety of applications.	
12.09	Demonstrate knowledge of hybrid electrical power storage units.	
12.10	Demonstrate knowledge of safe battery handling and disposal procedures according to local, state and federal regulations.	
13.0	Demonstrate proficiency in locating and repairing common installation and electrical problems in automobiles.--The student will be able to:	
13.01	Diagnose a voltage drop against a known good reference measurement.	
13.02	Evaluate short circuits and determine how they can originate.	
13.03	Locate and repair a short circuit between two points.	
13.04	Evaluate open circuits and determine how they can originate.	
13.05	Locate and repair an open circuit between two points.	
13.06	Measure and evaluate critical components for proper functioning.	
13.07	Describe the components used in soldering.	
13.08	Perform Soldered connections.	
13.09	Determine if soldering is appropriate for a particular installation situation.	
13.10	Use wiring diagrams to trace electrical/electronic circuits.	
13.11	Demonstrate the proper use of a digital multi-meter (DMM) when measuring source, voltage drop (including grounds), current flow, and resistance.	
13.12	Check operation of electrical circuits with a test light.	
13.13	Check operation of electrical circuits using fused jumper wires.	
13.14	Measure key-off battery drain (parasitic draw).	
13.15	Describe the characteristics and functions of various automotive relays and some of their common applications.	
13.16	Describe the characteristics and functions of various diodes and some of their common applications.	
14.0	Demonstrate a working knowledge of direct current circuits (DC).--The student will be able to:	
14.01	Measure properties of a DC circuit using DVOM meter and scopes.	
14.02	Apply Ohm's law to series circuits.	
14.03	Construct and verify operation of series circuits.	
14.04	Analyze and troubleshoot series circuits.	
14.05	Verify the operation of parallel circuits.	
14.06	Analyze and troubleshoot parallel circuits.	
14.07	Apply Ohm's law to parallel circuits.	
14.08	Construct and verify the operation of series-parallel circuits.	
14.09	Troubleshoot combination circuits.	
14.10	Describe magnetic properties of circuits and devices.	
14.11	Determine the physical and electrical characteristics of capacitors and inductors.	
14.12	Define DC motor theory and operation.	
15.0	Demonstrate a working knowledge of alternating current (AC) circuits.--The student will be able to:	
15.01	Identify properties of an AC signal.	
15.02	Identify AC sources.	
15.03	Analyze and measure AC signals utilizing DMM and scopes.	
15.04	Define the characteristics of AC capacitive circuits.	
15.05	Define the characteristics of AC inductive circuits.	
15.06	Define AC motor theory and operation.	
15.07	Define basic generator theory and operation.	
15.08	Apply OHM’s law to AC circuits	
16.0	Demonstrate proficiency in locating and troubleshooting common installation and electrical problems in automobiles.--The student will be able to:	
16.01	Describe the overall effect of voltage drops and determine the points at which they can originate.	
16.02	Measure voltage drops between two points.	
16.03	Troubleshoot a voltage drop against a known good reference measurement.	
16.04	Evaluate short circuits and determine how they can originate.	
16.05	Locate and repair a short circuit between two points.	
16.06	Evaluate open circuits and determine how they can originate.	
16.07	Locate and repair an open circuit between two points.	
16.08	Measure and evaluate critical components for proper functioning.	
17.0	Demonstrate a working knowledge of vehicle electrical systems.--The student will be able to:	
17.01	Define basic transistor theory and operation.	
17.02	Define basic Operational amplifier theory and operation.	
17.03	Define basic Integrated Circuit theory and operation.	
17.04	Define basic Logic Gate theory and operation.	
17.05	Define basic Switching Power Supply theory and operation.	
17.06	Define basic Data Bus Systems and Serial Data theory.	
17.07	Define basic Electronic Control Units and Sensors theory and operation.	
17.08	Define basic Multimedia and Control Network theory and operation.	
17.09	Define basic Hybrid Gas-electric Vehicle theory and operation.	
17.10	Identify High-voltage systems.	
17.11	Define basic integrated motor generator theory and operation.	
18.0	Demonstrate a working knowledge of On–Board Diagnostic systems (OBD).--The student will be able to:	
18.01	Describe OBD I system operation and limitations.	
18.02	Describe OBD II system operation and limitations.	

Florida Department of Education
Student Performance Standards

Course Title: 	Mobile Electronics Technology 2
Course Number: 	9540420 
Course Credit:	1

Course Description: 

The Mobile Electronics Technology 2 course content includes, but is not limited to, installation, configuration, operation, and maintenance of Mobile Audio/Video Systems; Auto-Sound, Wireless Communications, Security, Navigation, In-Vehicle Information Systems, Safety Systems, Satellite Antenna, and low voltage wiring systems.  Other course content includes, but is not limited to, communication, leadership skills, human relations and employability skills; and safe, efficient work practices.

CTE Standards and Benchmarks	
01.0	Demonstrate proficiency in occupational safety.--The student will be able to:	
01.01	List the level of electricity (shock) considered lethal to humans.	
01.02	Describe safety considerations when working in and around motor vehicles.	
01.03	Apply shop safety rules, EPA and OSHA standards.	
01.04	Explain the measurement and safety concerns of sound pressure level and hearing damage.	
01.05	Identify and use appropriate emergency first aid procedures.	
01.06	Describe the Federal Law as recorded in (29 CFR-1910.1200).	
01.07	Utilize and demonstrate safe procedures for handling of tools and equipment.	
01.08	Identify and use proper placement of floor jacks and jack stands.	
01.09	Identify and use proper procedures for safe lift operation.	
01.10	Utilize proper ventilation procedures for working within the lab/shop area.	
01.11	Identify marked safety areas.	
01.12	Identify the location and the types of fire extinguishers and other fire safety equipment.	
01.13	Demonstrate knowledge of the procedures for using fire extinguishers and other safety equipment.	
01.14	Identify the location and use of eye wash stations.	
01.15	Identify the location of the posted evacuation routes.	
01.16	Comply with the required use of safety glasses, ear protection, gloves, and shoes during lab/shop activities.	
01.17	Identify and wear appropriate clothing for lab/shop activities.	
01.18	Secure hair and jewelry for lab/shop activities.	
01.19	Demonstrate awareness of the safety aspects of supplemental restraint systems (SRS), electronic brake control systems, and hybrid vehicle high voltage circuits.	
01.20	Disable supplemental restraint systems (SRS) in accordance with manufacturers' procedures.	
01.21	Demonstrate awareness of the safety aspects of high voltage circuits (such as high intensity discharge (HID) lamps, ignition systems, injection systems, etc.)	
01.22	Locate and demonstrate knowledge of safety data sheets (SDS).	
02.0	Explain and apply required tasks associated with the proper use and handling of tools and equipment relating to the mobile electronics industry.--The student will be able to:	
02.01	Identify tools and equipment and their appropriate usage in mobile electronics applications.	
02.02	Identify and use standard and metric measurement skills and designation.	
02.03	Demonstrate proper cleaning, storage, and maintenance of tools and equipment.	
02.04	Demonstrate proper use of precision-measuring tools and torque methods.	
02.05	Identify, use and maintain hand and power tools properly.	
02.06	Identify and practice using appropriate precision measuring tools and torque methods.	
02.07	Identify and describe the proper tools to apply and remove automotive fasteners, to include thread repair.	
02.08	Identify and use metric and English measurement skills.	
03.0	Demonstrate proficiency in acceptable employee behavior in the automotive industry.--The student will be able to:	
03.01	Explain the effects of chemical/substance abuse.	
03.02	Identify principles of stress management.	
03.03	Demonstrate acceptable industry dress code.	
03.04	Identify and demonstrate proper customer relation skills.	
03.05	Identify and define payroll deductions (taxes, insurance, and social security) employee benefits and pay systems.	
03.06	Identify principles of time management.	
03.07	Identify acceptable customer relations.	
04.0	Demonstrate appropriate communication skills.--The student will be able to:	
04.01	Write logical and understandable statements, or phrases, to accurately fill out forms and invoices commonly used in business and industry.	
04.02	Read and use graphs, charts, diagrams, tables, parts manuals, and information sources commonly used in this industry/occupational area.	
04.03	Read and follow written and oral instructions.	
04.04	Answer and ask questions coherently and concisely.	
04.05	Read critically by recognizing assumptions and implications and by evaluating ideas.	
04.06	Demonstrate appropriate telephone/communication skills.	
05.0	Demonstrate proficiency in appropriate math skills as it relates to the mobile electronics industry.--The student will be able to:	
05.01	Read and interpret measuring devices.	
05.02	Solve number word problems.	
05.03	Write percent add fractions and decimals.	
05.04	Solve percent problems.	
05.05	Find the percent of a number.	
05.06	Operate a calculator.	
05.07	Understand and use the metric system.	
05.08	Convert inches to millimeters and millimeters to inches.	
05.09	Solve problems for volume, weight, area, circumference and perimeter measurements for rectangles, squares, and cylinders.	
05.10	Measure tolerance(s) on horizontal and vertical surfaces using millimeters, centimeters, feet and inches.	
05.11	Add, subtract, multiply and divide using fractions, decimals, and whole numbers.	
05.12	Determine the correct purchase price, to include sales tax for a materials list containing a minimum of six items.	
06.0	Demonstrate proficiency in appropriate understanding of basic sciences.--The student will be able to:	
06.01	Understand molecular action as a result of temperature extremes, chemical reaction, and moisture content.	
06.02	Draw conclusions or make inferences from data.	
06.03	Identify health-related problems, which may result from exposure to work related chemicals and hazardous materials, and know the proper precautions required for handling such materials.	
06.04	Understand pressure measurement in terms of Pounds per Square Inch (P.S.I.), inches of mercury (inHg) and kilopascals (K.P.A.)	
07.0	Demonstrate proficiency in preparing a vehicle for pre/post customer requested installations or services.--The student will be able to:	
07.01	Identify automobiles according to engine location, cylinders, type of drive system, purpose, etc.	
07.02	Identify purpose and demonstrate proper use of fender covers, floor mats and other vehicle protection equipment.	
07.03	Determine the presence of a Tire Pressure Monitoring System (TPMS).	
07.04	Determine the presence of an air suspension system.	
07.05	Locate and use the Vehicle Identification Number (VIN).	
07.06	Locate and use vehicle information placards, decals, tags, as required.	
07.07	Locate and use technical service bulletins (TSBs).	
07.08	Read and understand manufacturer’s specification sheets, equipment installation instructions and equipment owner’s manuals.	
07.09	Ensure vehicle is prepared to return to customer per school/company policy (floor mats, steering wheel cover, etc.).	
07.10	Use computer and operate keyboard.	
07.11	Identify automobiles according to vehicle identification number (VIN)	
07.12	Utilize flat rate manuals, service manuals, service bulletins, parts manuals and electronic service information.	
08.0	Describe the roles within teams, work units, departments, organizations, inter-organizational systems, and the larger environment.--The students will be able to:	
08.01	Describe the nature and types of business organizations.  	
08.02	Explain the effect of key organizational systems on performance and quality.	
08.03	List and describe quality control systems and/or practices common to the workplace.  	
08.04	Explain the impact of the global economy on business organizations.	
09.0	Demonstrate leadership and teamwork skills needed to accomplish team goals and objectives.--The students will be able to:	
09.01	Employ leadership skills to accomplish organizational goals and objectives.  	
09.02	Establish and maintain effective working relationships with others in order to accomplish objectives and tasks.  	
09.03	Conduct and participate in meetings to accomplish work tasks.  	
09.04	Employ mentoring skills to inspire and teach others.  	
10.0	Explain the importance of employability and entrepreneurship skills.--The student will be able to:	
10.01	Identify and demonstrate positive work behaviors needed to be employable.  	
10.02	Develop personal career plan that includes goals, objectives, and strategies.  	
10.03	Examine licensing, certification, and industry credentialing requirements.  	
10.04	Maintain a career portfolio to document knowledge, skills, and experience.  	
10.05	Evaluate and compare employment opportunities that match career goals.  	
10.06	Identify and exhibit traits for retaining employment.  	
10.07	Identify opportunities and research requirements for career advancement.  	
10.08	Research the benefits of ongoing professional development.  	
10.09	Examine and describe entrepreneurship opportunities as a career planning option.	
15.0	Demonstrate a working knowledge of vehicle electrical systems.--The student will be able to:	
15.01	Define basic transistor theory and operation.	
15.02	Define basic Operational amplifier theory and operation.	
15.03	Define basic Integrated Circuit theory and operation.	
15.04	Define basic Logic Gate theory and operation.	
15.05	Define basic Switching Power Supply theory and operation.	
15.06	Define basic Data Bus Systems and Serial Data theory.	
15.07	Define basic Electronic Control Units and Sensors theory and operation.	
15.08	Define basic Multimedia and Control Network theory and operation.	
15.09	Define basic Hybrid Gas-electric Vehicle theory and operation.	
15.10	Identify High-voltage systems.	
15.11	Define basic integrated motor generator theory and operation.	
16.0	Demonstrate a working knowledge of On–Board Diagnostic systems (OBD).--The student will be able to:	
16.01	Describe OBD I system operation and limitations.	
16.02	Describe OBD II system operation and limitations.	
17.0	Demonstrate knowledge of basic mobile audio/video systems.--The student will be able to:	
17.01	Demonstrate proper vehicle disassembly for audio system installations.	
17.02	Identify audio source formats.	
17.03	Identify Mobile audio source units.	
17.04	Identify head unit installation considerations.	
17.05	Demonstrate OEM Integration of audio inputs.	
17.06	Identify and explain proper operation of OEM interface devices.	
17.07	Define basic audio signal processing theory and operation.	
17.08	Define basic mobile audio amplifiers theory and operation.	
17.09	Define basic active and passive crossover networks theory and operation.	
17.10	Identify speaker types and enclosures.	
17.11	Define basic sound fundamentals.	
17.12	Demonstrate speaker installation	
17.13	Define basic digital and multi-channel sound theory and operation.	
17.14	Define basic video theory and operation.	
17.15	Identify video output formats.	
17.16	Demonstrate OEM audio integration with a video system installation.	
17.17	Identify troubleshooting steps for common video system installation problems.	
18.0	Demonstrate a working knowledge of security and convenience systems.--The student will be able to:	
18.01	Demonstrate proper vehicle disassembly for security and convenience installations.	
18.02	Identify OEM anti-theft systems.	
18.03	Discuss advanced security topics.	
18.04	Demonstrate proper identification of vehicle circuits.	
18.05	Demonstrate proper security system placement and mounting.	
18.06	Demonstrate troubleshooting common security system problems.	
18.07	Identify security and convenience system accessories.	
18.08	Demonstrate alternative security system applications.	
18.09	Demonstrate remote start system installation.	
18.10	Identify critical remote starter connections.	
18.11	Demonstrate proper OEM security interface and bypass for remote starter installation.	
18.12	Identify safety considerations required while installing and configuring a remote start system.	
18.13	Identify troubleshooting steps for remote start systems.	
19.0	Demonstrate a working knowledge of advanced in-vehicle information and control systems.--The student will be able to:	
19.01	Identify relevant data presented to drivers.	
19.02	Identify types of data available via satellite.	
19.03	Identify methods for sending data from vehicles.	
19.04	Identify subscription services.	
19.05	Demonstrate installation of satellite radio systems.	
19.06	Demonstrate installation of consumer telemetric systems.	
19.07	Demonstrate installation of 2-way radio communication systems.	
19.08	Demonstrate methods for integration and interfacing with on-board diagnostic systems.	
19.09	Identify troubleshooting steps for in-vehicle information systems.	
20.0	Demonstrate knowledge of basic telematics systems using wireless communications.--The student will be able to:	
20.01	Explain basic procedures for pairing smart phone systems.	
20.02	Explain basic function and operation of navigation systems.	
20.03	Explain basic function and operation of intelligent warning and detection systems.	
20.04	Explain the basic function and operation of satellite infotainment systems.	
21.0	Demonstrate proficiency in evaluating and assessing various circuits in a vehicle where aftermarket components will connect.--The student will be able to:	
21.01	Evaluate the vehicle’s ability to support aftermarket equipment, in particular audio amplifiers.	
21.02	Determine electrical upgrades according electrical demands.	
21.03	Evaluate OEM ignition switch wiring and associated circuits.	
21.04	Determine the polarity and function of wire connected to the ignition switch.	
21.05	Determine the polarity and function of wires connected to the headlight switch.	
21.06	Determine the polarity and function of each wire connected to the trunk release switch.	
21.07	Determine the polarity and function of each wire connected to the foot brake switch.	
21.08	Determine the polarity and function of each wire connected to the door lock/unlock switch.	
22.0	Demonstrate proficiency in the evaluation and installation of basic and advanced automotive audio system elements, enhancements or the replacement of audio system components.--The student will be able to:	
22.01	Determine the physical characteristics of an aftermarket head unit.	
22.02	Determine what connections and installation accessories are required for a particular head unit replacement.	
22.03	Install an aftermarket head unit.	
22.04	Determine the physical characteristics of aftermarket speakers.	
22.05	Determine what connections and installation accessories are required for a particular set of replacement speakers.	
22.06	Install aftermarket speakers.	
22.07	Determine the physical characteristics of aftermarket amplifier.	
22.08	Determine what connections and installation accessories are required for a particular amplifier.	
22.09	Install an aftermarket amplifier.	
22.10	Connect multiple speakers to a single channel.	
22.11	Perform both series and parallel wiring configurations noting the electrical characteristics of each.	
22.12	Perform amplifier bridging to one speaker.	
22.13	Perform amplifier bridging to two speakers.	
22.14	Install an aftermarket amplifier in an OEM system.	
22.15	Install and configure an aftermarket head unit in an OEM system.	
22.16	Install an aftermarket power antenna.	
22.17	Describe situations where resistors, relays and diodes need to be added to an automotive infotainment system.	
23.0	Demonstrate proficiency in the evaluation and installation of basic and advanced automotive security and convenience elements and components.--The student will be able to:	
23.01	Determine the physical characteristics of an aftermarket security system.	
23.02	Determine what connections and installation accessories are required to interface a particular security system with the vehicle.	
23.03	Install, program and configure an aftermarket security system.	
23.04	Describe situations when relays and diodes need to be added to an automotive security system.	
23.05	Install relays, resistors and diodes in an automotive security system.	
23.06	Determine the physical characteristics of a remote starter system.	
23.07	Determine what connections are required to interface a particular remote starter system with the vehicle.	
23.08	Install, program and configure a remote starter system.	
24.0	Demonstrate knowledge of a Wireless Local Area Network (WLAN).--The student will be able to: 	
24.01	Describe the standards associated with wireless media.	
24.02	Identify and describe the purpose of the components of a small WLAN.	
24.03	Describe small WLAN technologies and their applications in the mobile electronics industry.	
24.04	Demonstrate knowledge of how security features and capabilities of WI-FI Protected Access (WPA) operate.	
24.05	Describe common issues with implementing a WLAN and methods for addressing these issues.	
24.06	Describe common issues with implementing Blue-tooth communications and applications (APPS)	
25.0	Demonstrate knowledge of lighting systems (i.e. H.I.D, LED, halogen lights).--The student will be able to:	
25.01	Explain the safety concerns associated with the use of High-Intensity Discharge (H.I.D) lighting, halogen bulbs, and other lighting systems.	
25.02	Describe the operation of the primary and secondary voltage systems used in High-Intensity Discharge (H.I.D) lighting.	
25.03	Describe the testing procedures of the primary voltage systems used in High-Intensity Discharge (H.I.D) lighting.	
25.04	Describe the proper installation of Light-Emitting Diodes (LED) lighting.	
26.0	Demonstrate a working knowledge of basic installation knowledge and techniques.--The student will be able to:	
26.01	Identify and use power and pneumatic tools properly.	
26.02	Demonstrate general vehicle disassembly.	
26.03	Demonstrate basic fabrication techniques and proper use of fabrication materials.	
26.04	Demonstrate acceptable electronic testing and proper use of test equipment.	
26.05	Define basic aftermarket amplifier installation and operation.	
26.06	Identify troubleshooting steps for aftermarket amplifier problems.	
27.0	Demonstrate proficiency in the installation of Rear Seat Entertainment (RSE) Systems.--The student will be able to:	
27.01	Determine the physical characteristics of a standalone rear seat entertainment system.	
27.02	Determine what connections are required to interface a particular stand-alone rear seat entertainment system with the vehicle.	
27.03	Install, program and configure a standalone rear seat entertainment system.	
27.04	Integrate the sound from the video system through the OEM audio system.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Florida Standards for English Language Development (ELD)
English language learners communicate for social and instructional purposes within the school setting. ELD.K12.ELL.SI.1 

English Language Development (ELD) Standards Special Notes:
Teachers are required to provide listening, speaking, reading and writing instruction that allows English language learners (ELL) to communicate for social and instructional purposes within the school setting.   For the given level of English language proficiency and with visual, graphic, or interactive support, students will interact with grade level words, expressions, sentences and discourse to process or produce language necessary for academic success. The ELD standard should specify a relevant content area concept or topic of study chosen by curriculum developers and teachers which maximizes an ELL’s need for communication and social skills. To access an ELL supporting document which delineates performance definitions and descriptors, please click on the following link: http://www.cpalms.org/uploads/docs/standards/eld/SI.pdf.
For additional information on the development and implementation of the ELD standards, please contact the Bureau of Student Achievement through Language Acquisition at sala@fldoe.org.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program. Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the secondary student’s Individual Educational Plan (IEP) or 504 plan or postsecondary student’s accommodations’ plan to meet individual needs and ensure equal access. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

In addition to accommodations, some secondary students with disabilities (students with an IEP served in Exceptional Student Education (ESE)) will need modifications to meet their needs. Modifications change the outcomes or what the student is expected to learn, e.g., modifying the curriculum of a secondary career and technical education course. Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Some secondary students with disabilities (ESE) may need additional time (i.e., longer than the regular school year), to master the student performance standards associated with a regular course or a modified course.  If needed, a student may enroll in the same career and technical course more than once.  Documentation should be included in the IEP that clearly indicates that it is anticipated that the student may need an additional year to complete a Career and Technical Education (CTE) course. The student should work on different competencies and new applications of competencies each year toward completion of the CTE course.  After achieving the competencies identified for the year, the student earns credit for the course.  It is important to ensure that credits earned by students are reported accurately.  The district’s information system must be designed to accept multiple credits for the same course number for eligible students with disabilities.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml