2022- 2023

Florida Department of Education
Curriculum Framework 

Program Title:	Pattern Making and Construction 
Career Cluster:	Arts, A/V Technology & Communication

CCC	
CIP Number	0450040702	
Program Type	College Credit Certificate (CCC)	
Standard Length	21 credit hours	
CTSO	FCCLA	
SOC Codes (all applicable) 	51-6021 - Pressers, Textile, Garment, and Related Materials
51-6063 - Textile Knitting and Weaving Machine Setters, Operators, and Tenders
51-6092 - Fabric and Apparel Patternmakers	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose

This certificate program is part of the Fashion Design AS degree program (1450040700).

A College Credit Certificate consists of a program of instruction of less than sixty (60) credits of college-level courses, which is part of an AS or AAS degree program and prepares students for entry into employment (Rule 6A-14.030, F.A.C.).

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Arts, A/V Technology and Communication career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Arts, A/V Technology and Communication career cluster.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Demonstrate leadership and organizational skills.
02.0	Demonstrate appropriate basic skills essential to working in design occupations.
03.0	Select and safely use tools and equipment.
04.0	Operate and maintain a conventional and/or commercial/industrial sewing machine.
05.0	Select and prepare materials.
06.0	Demonstrate skill in the construction of simple garments.
07.0	Create an original pattern for a garment.

2022- 2023
Florida Department of Education
Student Performance Standards

Program Title:	Pattern Making and Construction
CIP Number:		0450040702
Program Length:	21 credit hours
SOC Code(s):		51-6021, 51-6063, 51-6092

This certificate program is part of the Fashion Design AS degree program (1450040700). At the completion of this program, the student will be able to:	
01.0	Demonstrate leadership and organizational skills. The student will be able to: 	
01.01	Demonstrate cooperation as a group member to achieve organizational goals. 	
01.02	Demonstrate confidence in leadership roles and organizational responsibilities. 	
02.0	Demonstrate appropriate basic skills essential to working in design services occupations. The student will be able to:	
02.01	Identify the knowledge, skills, and attitudes necessary to perform occupational tasks (e.g., email, phone, conversations with clients).	
02.02	Demonstrate the communication competencies required to perform occupational tasks.	
03.0	Select and safely use tools and equipment. The student will be able to:	
03.01	Identify the tools and equipment used in design services for sewing, cutting, measuring, fabric marking, and drafting.	
03.02	Select the appropriate tools and equipment for assigned projects; explain why the selection is appropriate for the project.	
03.03	Demonstrate proper and safe usage of tools and equipment.	
03.04	Identify and demonstrate safety procedures for the use of conventional sewing machines and home sergers, and pressing equipment.	
03.05	Explain the importance of observing Occupational Safety and Health Administration (OSHA) rules and regulations.	
03.06	Clean and maintain various types of tools and equipment.	
03.07	Keep an inventory record of tools, equipment, supplies, and materials using computer application software or other formatting options (e.g., written records).	
03.08	Research innovations in materials and technologies that contribute to safeguards in the tools and equipment used in fashion design services.	
03.09	Identify and apply drafting tools and techniques to a specific design services project (e.g., architectural ruler, light box, protractor, floor plans to scale, one-point perspective).	
04.0	Operate and maintain a conventional and/or commercial/industrial sewing machine. The student will be able to:	
04.01	Identify the parts of a sewing machine.	
04.02	Select the needles that appropriate for different fabric types; identify the process and demonstrate needle insertion.	
04.03	Identify the steps and demonstrate threading a sewing machine.	
04.04	Diagram and demonstrate the ability to wind the bobbin, thread the bobbin case, and insert the bobbin correctly into a sewing machine.	
04.05	Demonstrate straight stitching.	
04.06	Identify and demonstrate stitch length and width selection.	
04.07	Demonstrate utility and decorative stitches.	
04.08	Identify the tension and demonstrate tension adjustment.	
04.09	Demonstrate cleaning and lubricating the machine following manufacturer’s instructions.	
05.0	Select and prepare materials. The student will be able to:	
05.01	Identify and match pattern pieces.	
05.02	Read and interpret instructions and specifications.	
05.03	Identify fabric content.	
05.04	Prepare fabric.	
05.05	Adjust patterns according to pattern/teacher instructions.	
05.06	Lay out, pin, cut, and mark fabric according to a pattern or teacher instructions.	
05.07	Demonstrate stay stitching and ease stitching.	
05.08	Match grain lines and patterns according to a pattern or teacher instructions.	
05.09	Mark fabric for assembly according to a pattern or teacher instructions.	
05.10	Mark fabric for trims according to a pattern or teacher instructions.	
05.11	Match thread with fabric.	
05.12	Identify, select, and use content labels according to fabric requirements.	
06.0	Demonstrate skill in the construction of simple garments. The student will be able to:	
06.01	Identify common ready-to-wear sizes	
06.02	Identify and describe the characteristics of a properly fitted garment.	
06.03	Take accurate body measurements, select pattern size, and determine figure type.	
06.04	Interpret verbal, written, and visual directions.	
06.05	Prepare fabric and adjust patterns by following pattern directions.	
06.06	Lay out, pin, cut, and mark fabric according to pattern specifications.	
06.07	Demonstrate stay stitching and ease stitching.	
06.08	Demonstrate stitching darts and tucks.	
06.09	Identify and match garment pieces using markings; stitch according to directions.	
06.10	Match plaids, stripes and one-way designs.	
06.11	Demonstrate correct pressing techniques according to fabric requirements.	
06.12	Demonstrate casing and elastic installation.	
06.13	Demonstrate machine hemming according to machine manual instructions.	
06.14	Identify different types of sergers and their characteristics.	
07.0	Create an original pattern for a garment. The student will be able to:	
07.01	Plan and report on a fashion design project using established criteria.	
07.02	Using appropriate software, insert body measurements to produce a pattern.	
07.03	Draft and produce a paper pattern using personal measurements.	
07.04	Create slopers for a bodice, skirt, and pants; construct the slopers using grey goods and create a mood board that includes a title, photographs of the sloper, and the purpose/use of a sloper (include in Professional Portfolio).	
07.05	Create a muslin prototype of the pattern.	
07.06	Evaluate the prototype for proper fit and adjust as needed.	
07.07	Construct a specialty garment according to teacher instructions (the project must include a minimum number of construction skills as designated by the teacher).	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Career and Technical Student Organization (CTSO)

Florida Family Career and Community Leaders of America (FCCLA) is the intercurricular career and technical student organization(s) providing leadership training and reinforcing specific career and technical skills. Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml