2014 – 2015
Florida Department of Education
Curriculum Framework 
Program Title:	Painting and Decorating
Program Type:	Career Preparatory
Career Cluster:	Architecture & Construction

Secondary – Career Preparatory	
Program Number	8721500	
CIP Number	0646040800	
Grade Level	9-12, 30, 31	
Standard Length	4 Credits	
Teacher Certification	TEC ConstR ¶ 7 ¶ G
Bldg Const ¶ 7 ¶ G 
Painting 7G	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	47-2141 - Painters, Construction and Maintenance	
Facility Code	245 - http://www.fldoe.org/edfacil/sref.asp (State Requirements for Educational Facilities)	
Targeted Occupation List	http://www.labormarketinfo.com/wec/TargetOccupationList.htm	
Perkins Technical Skill Attainment Inventory	http://www.fldoe.org/workforce/perkins/perkins_resources.asp 	
Industry Certifications	http://www.fldoe.org/workforce/fcpea/default.asp 	
Statewide Articulation	http://www.fldoe.org/workforce/dwdframe/artic_frame.asp 	

Purpose 

The purpose of this program is to prepare students for employment as painters.

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Architecture and Construction career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Architecture and Construction career cluster. 

The content includes but is not limited to safe and efficient work practices, materials and cost estimates, surface preparation, paint mixing and matching, application procedures, special effects, wall covering application, blueprint reading, ladder and scaffold erection and use, selection, application and care of materials, use of hand and power tools, and use of current industry standards, practices and techniques.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of one occupational completion point (OCP).

The following table illustrates the secondary program structure:

OCP	Course Number	Course Title	Length	SOC Code	Level	
A	8721510
8721520
8721530
8721540	Painting 1
Painting 2
Painting and Decorating 3
Painting and Decorating 4	1 Credit
1 Credit
1 Credit
1 Credit	

47-2141	2
2
2
2	

Florida Standards for Technical Subjects 

Florida Standards (FS) for English Language Arts and Literacy in History/Social Studies, Science, and Technical Subjects are the critical reading and writing literacy standards designed for grade 6 and above.  These standards are predicated on teachers of history/social studies, science, and technical subjects using their content area expertise to help students meet the particular challenges of reading, writing, speaking, listening, and language in their respective fields.  It is important to note that the 6-12 literacy standards in history/social studies, science, and technical subjects are not meant to replace content standards in those areas but rather to supplement them.

This curriculum framework incorporates the grades 9-10 reading and writing literacy standards in the first two courses of this CTE program and grade 11-12 reading and writing literacy standards in the third and fourth courses of this CTE program.  The standards for Mathematical Practices describe varieties of expertise that educators at all levels should seek to develop in their students.  These practices rest on important “processes and proficiencies” with longstanding importance in mathematics education.  This curriculum framework incorporates the appropriate mathematical practices in the first four courses of this CTE program.  

Florida Standards for Mathematics & Language Arts (FS-M/LA)

Some or all of the courses in this program have been aligned to the Florida Standards for Mathematics and Language Arts used in core academic classes.  Data shown in the framework table (column ‘FS-M/LA’) contains the results of these alignment efforts.

Next Generation Sunshine State Standards (NGSSS) - Science 

Some or all of the courses in this program have been aligned to the Next Generation Sunshine State Standards (NGSSS) for Science. These standards are listed next to the content standards.

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Painting and Decorating. 
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Painting and Decorating.
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.
04.0	Work safely.
05.0	Select, use and care for tools, equipment, scaffolding and ladders.
06.0	Prepare surfaces.
07.0	Use painting materials.
08.0	Demonstrate the importance of health, safety and environmental management systems in organizations and their importance to organizational performance and regulatory compliance.
09.0	Use chemical stripping and cleaning solutions.
10.0	Estimate cost and provide quotations.
11.0	Demonstrate mathematics knowledge and skills.	
12.0	Demonstrate proper application of materials used in painting using brushes, rollers and sprayers.
13.0	Mix colors and match samples.
14.0	Demonstrate science knowledge and skills.
15.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Painting and Decorating.
16.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Painting and Decorating.
17.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.
18.0	Apply stains, varnishes, lacquers and acrylics.
19.0	Advise on suitability of different materials.
20.0	Fit and apply wallpaper.
21.0	Explain the importance of employability and entrepreneurship skills.

2014 – 2015
Florida Department of Education
Student Performance Standards

Course Title: 		Painting 1
Course Number: 	8721510
Course Credit:	1

Course Description:

This course is designed to provide instruction in safe and proper use and care of related tools and equipment proper safety practices, the use storage and disposal materials. 

Florida Standards	Correlation to CTE Program Standard #	
01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Painting and Decorating.		
01.01	Key Ideas and Details		
01.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to the precise details of explanations or descriptions.
LAFS.910.RST.1.1		
01.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.910.RST.1.2		
01.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.910.RST.1.3		
01.02	Craft and Structure		
01.02.1	Determine the meaning of symbols, key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 9–10 texts and topics.
LAFS.910.RST.2.4		
01.02.2	Analyze the structure of the relationships among concepts in a text, including relationships among key terms (e.g., force, friction, reaction force, energy).
LAFS.910.RST.2.5		
01.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, defining the question the author seeks to address.
LAFS.910.RST.2.6		
01.03	Integration of Knowledge and Ideas		
01.03.1	Translate quantitative or technical information expressed in words in a text into visual form (e.g., a table or chart) and translate information expressed visually or mathematically (e.g., in an equation) into words.
LAFS.910.RST.3.7		
01.03.2	Assess the extent to which the reasoning and evidence in a text support the author’s claim or a recommendation for solving a scientific or technical problem.
LAFS.910.RST.3.8		
01.03.3	Compare and contrast findings presented in a text to those from other sources (including their own experiments), noting when the findings support or contradict previous explanations or accounts.
LAFS.910.RST.3.9		
01.04	Range of Reading and Level of Text Complexity		
01.04.1	By the end of grade 9, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 9–10 text complexity band proficiently, with scaffolding as needed at the high end of the range.
01.04.2	By the end of grade 10, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 9–10 text complexity band independently and proficiently.
LAFS.910.RST.4.10		
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Painting and Decorating.		
02.01	Text Types and Purposes		
02.01.1	Write arguments focused on discipline-specific content.
LAFS.910.WHST.1.1		
02.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.910.WHST.1.2		
02.01.3	Write precise enough descriptions of the step-by-step procedures they use in their investigations or technical work that others can replicate them and (possibly) reach the same results.
LAFS.910.WHST.1.3		
02.02	Production and Distribution of Writing		
02.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.910.WHST.2.4		
02.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.910.WHST.2.5		
02.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products, taking advantage of technology’s capacity to link to other information and to display information flexibly and dynamically.
LAFS.910.WHST.2.6		
02.03	Research to Build and Present Knowledge		
02.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.910.WHST.3.7		
02.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the usefulness of each source in answering the research question; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and following a standard format for citation.
LAFS.910.WHST.3.8		
02.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.910.WHST.3.9		
02.04	Range of Writing		
02.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.910.WHST.4.10		
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.		
03.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
03.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
03.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
03.04	Model with mathematics.
MAFS.K12.MP.4.1		
03.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
03.06	Attend to precision.
MAFS.K12.MP.6.1		
03.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
03.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
04.0	Demonstrate the ability to work safely--The student will be able to:			
04.01	Explain the hazards of working above ground and appropriate work habits.			
04.02	Explain and demonstrate safe use of hand and power tools.			
05.0	Select, use and care for tools and equipment, scaffolding and ladders--The student will be able to:			
05.01	Erect a scaffold.			
05.02	Demonstrate proper use of folding and extension ladders.			
05.03	Explain proper storage of flammable materials.			
05.04	Explain and demonstrate proper cleaning and storage of tools and equipment.			
06.0	Demonstrate proficiency in preparation of surfaces--The student will be able to:			
06.01	Prepare new wood surfaces for coating with paint.			
06.02	Remove old wall coverings.			
06.03	Prepare and seal walls for wall coverings.			
06.04	Prime plaster and sheetrock surfaces for painting.			
06.05	Prepare metal surfaces for painting.			
06.06	Use sandblasting equipment to remove old surface coatings.			
06.07	Spackle/patch sheetrock and plaster surfaces.			
07.0	Demonstrate the use of the materials used in painting--The student will be able to:			
07.01	Explain the criteria for selection and use of water and chemical based coatings.			
07.02	Select brushes, roller covers and spray equipment for coatings to be used.			
08.0	Demonstrate the importance of health, safety and environmental management systems in organizations and their importance to organizational performance and regulatory compliance--The students will be able to:			
08.01	Describe personal and jobsite safety rules and regulations that maintain safe and healthy work environments.			
08.02	Explain emergency procedures to follow in response to workplace accidents.			
08.03	Create a disaster and/or emergency response plan.			
08.04	Demonstrate knowledge of the "Right-To-Know Law" as recorded in (29 CFR-1910.1200).			
09.0	Use chemical stripping and cleaning solutions--The student will be able to:			
09.01	Remove a finish from a painted surface using a chemical solution.			
09.02	Use prepared solutions to clean a surface.			
09.03	Apply rust inhibitors to metal surfaces.			
10.0	Estimate cost and provide quotations--The student will be able to:			
10.01	Compute number of rolls of wallpaper required for a specified job.			
10.02	Compute amount of paint for a specified job.			
11.0	Demonstrate mathematics knowledge and skills--The students will be able to:			
11.01	Demonstrate knowledge of arithmetic operations.			
11.02	Analyze and apply data and measurements to solve problems and interpret documents.			
11.03	Construct charts/tables/graphs using functions and data.			
11.04	Solve problems for volume, weight, area, circumference and perimeter measurements for rectangles, squares and cylinders.			
11.05	Measure tolerance(s) on horizontal and vertical surfaces using millimeters, centimeters, feet and inches.			
11.06	Add, subtract, multiply and divide using fractions, decimals and whole numbers.			
11.07	Determine the correct purchase price, to include sales tax for a materials list containing a minimum of six items.			
11.08	Demonstrate an understanding of federal, state and local taxes and their computation.			

2014 – 2015
Florida Department of Education
Student Performance Standards

Course Title:		Painting 2
Course Number: 	8721520
Course Credit:	1

Course Description:

This course is designed to provide instruction in the proper use and care of painting equipment, selection, mixing and application of materials used in painting.

Florida Standards	Correlation to CTE Program Standard #	
01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Painting and Decorating.		
01.01	Key Ideas and Details		
01.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to the precise details of explanations or descriptions.
LAFS.910.RST.1.1		
01.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.910.RST.1.2		
01.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.910.RST.1.3		
01.02	Craft and Structure		
01.02.1	Determine the meaning of symbols, key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 9–10 texts and topics.
LAFS.910.RST.2.4		
01.02.2	Analyze the structure of the relationships among concepts in a text, including relationships among key terms (e.g., force, friction, reaction force, energy).
LAFS.910.RST.2.5		
01.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, defining the question the author seeks to address.
LAFS.910.RST.2.6		
01.03	Integration of Knowledge and Ideas		
01.03.1	Translate quantitative or technical information expressed in words in a text into visual form (e.g., a table or chart) and translate information expressed visually or mathematically (e.g., in an equation) into words.
LAFS.910.RST.3.7		
01.03.2	Assess the extent to which the reasoning and evidence in a text support the author’s claim or a recommendation for solving a scientific or technical problem.
LAFS.910.RST.3.8		
01.03.3	Compare and contrast findings presented in a text to those from other sources (including their own experiments), noting when the findings support or contradict previous explanations or accounts.
LAFS.910.RST.3.9		
01.04	Range of Reading and Level of Text Complexity		
01.04.1	By the end of grade 9, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 9–10 text complexity band proficiently, with scaffolding as needed at the high end of the range.
01.04.2	By the end of grade 10, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 9–10 text complexity band independently and proficiently.
LAFS.910.RST.4.10		
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Painting and Decorating.		
02.01	Text Types and Purposes		
02.01.1	Write arguments focused on discipline-specific content.
LAFS.910.WHST.1.1		
02.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.910.WHST.1.2		
02.01.3	Write precise enough descriptions of the step-by-step procedures they use in their investigations or technical work that others can replicate them and (possibly) reach the same results.
LAFS.910.WHST.1.3		
02.02	Production and Distribution of Writing		
02.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.910.WHST.2.4		
02.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.910.WHST.2.5		
02.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products, taking advantage of technology’s capacity to link to other information and to display information flexibly and dynamically.
LAFS.910.WHST.2.6		
02.03	Research to Build and Present Knowledge		
02.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.910.WHST.3.7		
02.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the usefulness of each source in answering the research question; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and following a standard format for citation.
LAFS.910.WHST.3.8		
02.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.910.WHST.3.9		
02.04	Range of Writing		
02.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.910.WHST.4.10		
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.		
03.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
03.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
03.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
03.04	Model with mathematics.
MAFS.K12.MP.4.1		
03.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
03.06	Attend to precision.
MAFS.K12.MP.6.1		
03.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
03.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
12.0	Demonstrate proper application of materials used in painting using brushes, rollers and sprayers--The student will be able to:			
12.01	Paint a surface using a brush.			
12.02	Paint trim with a brush.			
12.03	Paint a surface with a roller.			
12.04	Spray paint a surface.			
13.0	Mix colors and match samples--The student will be able to:			
13.01	Identify fundamental colors.			
13.02	Explain the process of mixing to arrive at custom colors or tints.			
13.03	Mix paint to match a given sample.			
14.0	Demonstrate science knowledge and skills--The student will be able to: 			
14.01	Understand molecular action as a result of temperature extremes, chemical reaction and moisture content.			
14.02	Discuss the role of creativity in constructing scientific questions, methods and explanations.			
14.03	Formulate scientifically investigable questions, construct investigations, collect and evaluate data, and develop scientific recommendations based on findings.			
14.04	Identify health-related problems, which may result from exposure to work related chemicals and hazardous materials, and know the proper precautions required for handling such materials.			
14.05	Understand pressure measurement in terms of PSI, inches of mercury and KPA.			

2014 – 2015
Florida Department of Education
Student Performance Standards

Course Title: 		Painting and Decorating 3
Course Number: 	8721530
Course Credit:	1

Course Description:

This course is designed to provide instruction in the preparation of surfaces for finishes, the selection, mixing and application of stains, varnishes, lacquers and finishes.

Florida Standards	Correlation to CTE Program Standard #	
15.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Painting and Decorating.		
15.01	Key Ideas and Details		
15.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to important distinctions the author makes and to any gaps or inconsistencies in the account.
LAFS.1112.RST.1.1		
15.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.1112.RST.1.2		
15.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.1112.RST.1.3		
15.02	Craft and Structure		
15.02.1	Determine the meaning of symbols key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 11–12 texts and topics.
LAFS.1112.RST.2.4		
15.02.2	Analyze how the text structures information or ideas into categories or hierarchies, demonstrating understanding of the information or ideas.
LAFS.1112.RST.2.5		
15.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, identifying important issues that remain unresolved.
LAFS.1112.RST.2.6		
15.03	Integration of Knowledge and Ideas		
15.03.1	Integrate and evaluate multiple sources of information presented in diverse formats and media (e.g. quantitative data, video, multimedia) in order to address a question or solve a problem.
LAFS.1112.RST.3.7		
15.03.2	Evaluate the hypotheses, data, analysis, and conclusions in a science or technical text, verifying the data when possible and corroborating or challenging conclusions with other sources of information.
LAFS.1112.RST.3.8		
15.03.3	Synthesize information from a range of sources (e.g., texts, experiments, simulations) into a coherent understanding of a process, phenomenon, or concept, resolving conflicting information when possible.
LAFS.1112.RST.3.9		
15.04	Range of Reading and Level of Text Complexity		
15.04.1	By the end of grade 11, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 11–CCR text complexity band proficiently, with scaffolding as needed at the high end of the range.
15.04.2	By the end of grade 12, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 11–CCR text complexity band independently and proficiently.
LAFS.1112.RST.4.10		
16.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Painting and Decorating.		
16.01	Text Types and Purposes		
16.01.1	Write arguments focused on discipline-specific content.
LAFS.1112.WHST.1.1		
16.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.1112.WHST.1.2		
16.01.3	Write precise enough descriptions of the step-by-step procedures they use in their investigations or technical work that others can replicate them and (possibly) reach the same results.
LAFS.1112.WHST.1.3		
16.02	Production and Distribution of Writing		
16.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.1112.WHST.2.4		
16.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.1112.WHST.2.5		
16.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products in response to ongoing feedback, including new arguments or information.
LAFS.1112.WHST.2.6		
16.03	Research to Build and Present Knowledge		
16.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.1112.WHST.3.7		
16.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the strengths and limitations of each source in terms of the specific task, purpose, and audience; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and overreliance on any one source and following a standard format for citation.
LAFS.1112.WHST.3.8		
16.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.1112.WHST.3.9		
16.04	Range of Writing		
16.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.1112.WHST.4.10		
17.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.		
17.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
17.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
17.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
17.04	Model with mathematics.
MAFS.K12.MP.4.1		
17.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
17.06	Attend to precision.
MAFS.K12.MP.6.1		
17.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
17.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
18.0	Apply stains, varnishes, lacquers and acrylics--The student will be able to:			
18.01	Stain woodwork to a uniform color.			
18.02	Stain wood to match a sample.			
18.03	Seal wood for finishing.			
18.04	Apply a varnish finish to a prepared wood surface.			
18.05	Apply an oil finish to a prepared wood surface.			
18.06	Apply a lacquer finish to a prepared wood surface.			
18.07	Apply an acrylic finish to a prepared wood surface.			
19.0	Advise on suitability of different materials--The student will be able to:			
19.01	Select a suitable type of wall covering based on surface of wall and environment.			
19.02	Select a suitable type of coating based on surface, anticipated wear and environment.			

2014 – 2015
Florida Department of Education
Student Performance Standards

Course Title: 		Painting and Decorating 4
Course Number: 	8721540
Course Credit:	1

Course Description:

This course is designed to provide instruction in the preparation of surfaces for fitting and applying wallpaper, demonstrate employability skills, and an understanding of entrepreneurship.

Florida Standards	Correlation to CTE Program Standard #	
15.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Painting and Decorating.		
15.01	Key Ideas and Details		
15.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to important distinctions the author makes and to any gaps or inconsistencies in the account.
LAFS.1112.RST.1.1		
15.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.1112.RST.1.2		
15.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.1112.RST.1.3		
15.02	Craft and Structure		
15.02.1	Determine the meaning of symbols key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 11–12 texts and topics.
LAFS.1112.RST.2.4		
15.02.2	Analyze how the text structures information or ideas into categories or hierarchies, demonstrating understanding of the information or ideas.
LAFS.1112.RST.2.5		
15.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, identifying important issues that remain unresolved.
LAFS.1112.RST.2.6		
15.03	Integration of Knowledge and Ideas		
15.03.1	Integrate and evaluate multiple sources of information presented in diverse formats and media (e.g. quantitative data, video, multimedia) in order to address a question or solve a problem.
LAFS.1112.RST.3.7		
15.03.2	Evaluate the hypotheses, data, analysis, and conclusions in a science or technical text, verifying the data when possible and corroborating or challenging conclusions with other sources of information.
LAFS.1112.RST.3.8		
15.03.3	Synthesize information from a range of sources (e.g., texts, experiments, simulations) into a coherent understanding of a process, phenomenon, or concept, resolving conflicting information when possible.
LAFS.1112.RST.3.9		
15.04	Range of Reading and Level of Text Complexity		
15.04.1	By the end of grade 11, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 11–CCR text complexity band proficiently, with scaffolding as needed at the high end of the range.
15.04.2	By the end of grade 12, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 11–CCR text complexity band independently and proficiently.
LAFS.1112.RST.4.10		
16.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Painting and Decorating.		
16.01	Text Types and Purposes		
16.01.1	Write arguments focused on discipline-specific content.
LAFS.1112.WHST.1.1		
16.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.1112.WHST.1.2		
16.01.3	Write precise enough descriptions of the step-by-step procedures they use in their investigations or technical work that others can replicate them and (possibly) reach the same results.
LAFS.1112.WHST.1.3		
16.02	Production and Distribution of Writing		
16.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.1112.WHST.2.4		
16.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.1112.WHST.2.5		
16.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products in response to ongoing feedback, including new arguments or information.
LAFS.1112.WHST.2.6		
16.03	Research to Build and Present Knowledge		
16.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.1112.WHST.3.7		
16.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the strengths and limitations of each source in terms of the specific task, purpose, and audience; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and overreliance on any one source and following a standard format for citation.
LAFS.1112.WHST.3.8		
16.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.1112.WHST.3.9		
16.04	Range of Writing		
16.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.1112.WHST.4.10		
17.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Painting and Decorating.		
17.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
17.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
17.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
17.04	Model with mathematics.
MAFS.K12.MP.4.1		
17.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
17.06	Attend to precision.
MAFS.K12.MP.6.1		
17.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
17.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
20.0	Fit and apply wallpaper--The student will be able to:			
20.01	Select and mix paste (for non-pre-pasted) wall coverings.			
20.02	Apply grass cloth wall covering.			
20.03	Apply paper wall covering.			
20.04	Apply foil wall covering.			
20.05	Apply Mylar wall covering.			
20.06	Apply cloth-backed wall covering.			
20.07	Match a pattern to a corner.			
20.08	Fit wall paper around a window and door.			
21.0	Explain the importance of employability and entrepreneurship skills--The students will be able to:			
21.01	Identify and demonstrate positive work behaviors needed to be employable.			
21.02	Develop personal career plan that includes goals, objectives and strategies.			
21.03	Examine licensing, certification and industry credentialing requirements.			
21.04	Maintain a career portfolio to document knowledge, skills and experience.			
21.05	Evaluate and compare employment opportunities that match career goals.			
21.06	Identify and exhibit traits for retaining employment.			

2014 – 2015
Additional Information

Laboratory Activities

Laboratory investigations, including the use of scientific research, measurement, and laboratory technologies are an integral part of this course.  These activities include instruction in the use of safety procedures, tools, equipment, materials, and processes related to these occupations.  Equipment and supplies should be provided to enhance hands-on experiences for students.

Special Notes

The occupational standards and benchmarks outlined in this secondary program correlate to the standards and benchmarks of the postsecondary program with the same Classification of Instructional Programs (CIP) number.

Career and Technical Student Organization (CTSO)

SkillsUSA is the appropriate career and technical student organization for providing leadership training and reinforcing specific career and technical skills. Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  The activities of such organizations are defined as part of the curriculum in accordance with Rule 6A-6.065, F.A.C.

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the secondary student’s Individual Educational Plan (IEP) or 504 plan or postsecondary student’s accommodations’ plan to meet individual needs and ensure equal access.  Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors.  Accommodations received in postsecondary education may differ from those received in secondary education.  Accommodations change the way the student is instructed.  Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems.  Documentation of the accommodations requested and provided should be maintained in a confidential file.

In addition to accommodations, some secondary students with disabilities (students with an IEP served in Exceptional Student Education (ESE)) will need modifications to meet their needs.  Modifications change the outcomes or what the student is expected to learn, e.g., modifying the curriculum of a secondary career and technical education course.  Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Some secondary students with disabilities (ESE) may need additional time (i.e., longer than the regular school year), to master the student performance standards associated with a regular Occupational Completion Point (OCP) or a Modified Occupational Completion Point (MOCP).  If needed, a student may enroll in the same career and technical course more than once.  Documentation should be included in the IEP that clearly indicates that it is anticipated that the student may need an additional year to complete an OCP/MOCP.  The student should work on different competencies and new applications of competencies each year toward completion of the OCP/MOCP.  After achieving the competencies identified for the year, the student earns credit for the course.  It is important to ensure that credits earned by students are reported accurately.  The district’s information system must be designed to accept multiple credits for the same course number for eligible students with disabilities.

Articulation

For details on articulation agreements which correlate to programs and industry certifications refer to http://www.fldoe.org/workforce/dwdframe/artic_frame.asp.

Bright Futures/Gold Seal Scholarship

Course substitutions as defined in the Comprehensive Course Table for this program area may be used to qualify a student for Florida’s Gold Seal Vocational Scholarship, providing all other eligibility requirements are met.  Eligibility requirements are available online at https://www.osfaffelp.org/bfiehs/fnbpcm02_CCTMain.aspx. 

Fine Arts/Practical Arts Credit

Many courses in CTE programs meet the Fine Arts/Practical Arts credit for high school graduation (http://www.fldoe.org/articulation/CCD/files/pacourses1314.pdf).  A listing of approved CTE courses is published each year as a supplemental resource to the Course Code Directory (http://www.fldoe.org/articulation/CCD/default.asp).
 
Equivalent Mathematics and Equally Rigorous Science Courses

Equally rigorous science courses are based upon levels of cognitive complexity of content specific benchmarks, depth and breadth of content focus, and required laboratory components.