2018 - 2019
Florida Department of Education
Curriculum Framework 

Program Title:	Barbering
Program Type:	Career Preparatory
Career Cluster:	Human Services

PSAV	
Program Number	I120402	
CIP Number	0612040200	
Grade Level	30, 31	
Standard Length	1200 hours	
Teacher Certification	Refer to the Program Structure section.	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	39-5011 Barbers	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	
Basic Skills Level	Mathematics:	9
Language:	9
Reading:	9	

Purpose

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Human Services career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Human Services career cluster. 
The purpose of this program is to prepare students for employment as restricted barbers (SOC 39-5011) or barbers (SOC 39-5011).  Instruction is designed to qualify students for employment upon successfully passing the Florida Restricted Barber or Barber License Examination.

The content includes but is not limited to communication skills, leadership skills, human relations skills and employability skills, safe and efficient work practices; Florida barber law and rules, knowledge of barbering and its related chemistry, bacteriology, anatomy and physiology; development of skill in performing the manipulative technique required in the practice of barbering.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of two occupational completion points.

This program is comprised of courses which have been assigned course numbers in the SCNS (Statewide Course Numbering System) in accordance with Section 1007.24 (1), F.S. Career and Technical credit shall be awarded to the student on a transcript in accordance with Section 1001.44(3)(b), F.S.

To teach the courses listed below, instructors must hold at least one of the teacher certifications indicated for that course.

The following table illustrates the postsecondary program structure:

OCP	Course Number	Course Title	Teacher Certification	Length	SOC Code	
A

	COS0150	Restricted Barber 1	BARBERING 7 G
PERS SERV @7  7G	333 hours	39-5011	
	COS0151	Restricted Barber 2		333 hours		
	COS0152	Restricted Barber 3		334 hours		
B	COS0671	Barber		200 hours		

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Demonstrate safe, sanitary and efficient work practices.
02.0	Identify and perform shampoo/hair conditioners and scalp treatment.
03.0	Identify and perform trimming/shaping hair.
04.0	Identify and perform hairstyles.
05.0	Identify and perform mustache and beard design.
06.0	Demonstrate shaving the face.
07.0	Demonstrate appropriate understanding of basic science.
08.0	Identify and perform facial treatments.
09.0	Demonstrate knowledge of professional development (employability skills).
10.0	Demonstrate knowledge of Florida law and State Board requirements.
11.0	Demonstrate an understanding of entrepreneurship.
12.0	Identify and prepare hairpieces, wigs and hair attachments.
13.0	Identify and perform permanent wave/reconstruction curl/chemical relaxing.
14.0	Identify and apply temporary/semi-permanent and permanent color/bleach and specialty color techniques.

2018 - 2019
Florida Department of Education
Student Performance Standards

Program Title:	Barbering
PSAV Number:	I120402

Course Number:  COS0150
Occupational Completion Point:  A
Restricted Barber – 333 Hours – SOC Code 39-5011	
01.0	Demonstrate safe, sanitary and efficient work practices – the student will be able to:	
01.01	Observe and apply sanitation and shop safety rules and practices in all skill procedures.	
01.02	Set up and operate equipment and utilize materials.	
01.03	Clean and maintain implements and equipment.	
01.04	Demonstrate professional ethics with clients and co-workers.	
01.05	Analyze and recognize hair, skin and scalp conditions.	
01.06	Analyze hair, skin and scalp products using Ph scale.	
01.07	Identify the histology of skin and hair.	
01.08	Exhibit professional occupational skills.	
01.09	Determine the need for and perform corrective services.	
02.0	Identify and perform shampoo/hair conditioners and scalp treatment – the student will be able to:	
02.01	Prepare the client for service.	
02.02	Analyze and recognize hair and scalp condition.	
02.03	Select appropriate products (shampoo, conditioners, scalp treatments).	
02.04	Apply shampoo and manipulate to cleanse hair and scalp.	
02.05	Rinse shampoo thoroughly from hair and scalp.	
02.06	Select appropriate hair or scalp conditioners/treatment (reconstructor, acid rinse, moisturizer, detangler, oily)	
02.07	Apply treatment or conditioner according to manufacturer's directions.	
02.08	Perform scalp manipulation, if required.	
02.09	Set up and operate electrical equipment as required (high frequency currents, ultra violet or infrared 	
03.0	Identify and perform trimming/shaping hair (cutting) – the student will be able to:	
03.01	Prepare the client and determine needs and desires (consultation).	
03.02	Select and utilize hair cutting implements and techniques shears, razor, clippers, texturizing implements).	
03.03	Section hair and proceed with wet or dry hair cut utilizing all elevations (solid form, graduated, layered, over-directed) and combinations with or without blends.	
03.04	Edge and clean neckline with razor, clipper or shears.	
03.05	Check completed cut.	
03.06	Sanitize cutting implements using Universal Sanitation Procedures.	
	
Course Number:  COS0151
Occupational Completion Point:  A
Restricted Barber – 333 Hours – SOC Code 39-5011	
04.0	Identify and perform hair styles – the student will be able to:	
04.01	Prepare client and determine needs and desired style (consultation).	
04.02	Identify and perform wet set using principles of design (hair sculpting, rollers and fingerwaves).	
04.03	Prepare and perform thermal styling using electric rollers, blow dryers, curling irons, crimping irons, thermo-pressing combing, air-waving combs using principles of design.	
04.04	Comb out into desired style.	
04.05	Utilize braiding technique.	
05.0	Identify and perform mustache and beard design – the student will be to:	
05.01	Prepare the client.	
05.02	Demonstrate suitable mustache and/or beard design and cutting based on facial structure.	
05.03	Demonstrate trimming a mustache or trimming a beard.	
05.04	Practice standard finishing and sanitation procedures.	
06.0	Demonstrate shaving the face – the student will be able to:	
06.01	Prepare patron for shaving.	
06.02	Perform the shaving of the patron's face.	
06.03	Perform the final cleansing of face and neck.	
	
Course Number:  COS0152
Occupational Completion Point:  A
Restricted Barber – 334 Hours – SOC Code 39-5011 	
07.0	Demonstrate appropriate understanding of basic science – the student will be able to:	
07.01	Identify health-related problems that may result from exposure to work related chemicals and hazardous materials, and know the proper precautions required for ventilating and handling such materials.	
07.02	Understand molecular reactions of skin and hair as a result of physical and chemical changes.	
07.03	Draw conclusions or make inferences from data.	
08.0	Identify and perform facial treatments – the student will be able to:	
08.01	Prepare the patron.	
08.02	Diagnose and identify skin condition.	
08.03	Assemble supplies and equipment.	
08.04	Cleanse face and neck.	
08.05	Perform designated treatment (mechanical or manual).	
08.06	Perform final cleansing of face and neck.	
09.0	Demonstrate knowledge of professional development employability skills – the student will be able to:	
09.01	Perform safety and health practices.	
09.02	Locate and select employment opportunities.	
09.03	Understand employment capabilities.	
09.04	Demonstrate employment-seeking skills.	
09.05	Demonstrate appropriate work behavior.	
09.06	Project a professional image.	
09.07	Work individually and cooperatively as a member of regular or culturally diverse team.	
09.08	Utilize communication skills applicable to the industry.	
09.09	Utilize math skills applicable to the industry.	
09.10	Adapt to change.	
09.11	Balance personal and professional life.	
09.12	Use and conserve resources and energy.	
09.13	Use or explain how computers are used in the Barbering business.	
10.0	Demonstrate knowledge of Florida Law and State Board requirements – the student will be able to:	
10.01	Demonstrate working knowledge of Florida Law, Chapter 476.	
10.02	Demonstrate universal HIV-AIDS precaution procedures for the salon and knowledge of appropriate behavior in dealing with persons who may have the virus or syndrome.	
10.03	Demonstrate an understanding of the Federal "Right-To-Know" Law as stated in 29 C.F.R. 1910.1200.	
11.0	Demonstrate an understanding of entrepreneurship – the student will be able to:	
11.01	Define entrepreneurship.	
11.02	Describe the importance of entrepreneurship to the American economy.	
11.03	List the advantages and disadvantages of business ownership.	
11.04	Identify the risks involved in ownership of a business.	
11.05	Identify the necessary personal characteristics of a successful entrepreneur.	
11.06	Identify the business skills needed to operate a small business efficiently and effectively.	
	
Course Number:  COS0671
Occupational Completion Point:  B
Barber – 200 Hours – SOC Code 39-5011 	
12.0	Identify and prepare hair pieces wigs and hair attachments – the student will be able to:	
12.01	Determine and identify styles and colors of wigs and hairpieces.	
12.02	Measure the head and fit wig or hairpiece.	
12.03	Clean, shape, and style to client's features.	
12.04	Attach and blend hair pieces/extensions into desired style.	
13.0	Identify and perform permanent wave/reconstruction curl/chemical relaxing – the student will be able to:	
13.01	Prepare client and determine needs and desired style (consultation).	
13.02	Analyze hair, check scalp.	
13.03	Select appropriate solution strength according to hair texture, desired results.	
13.04	Perform shampoo and shaping as required.	
13.05	Apply protective cream or lotion.	
13.06	Apply rearranger or straightener as required for desired results following curl or chemical relaxer.	
13.07	Strand test for straightness if performing reconstruction curl or chemical relaxer.	
13.08	Rinse or shampoo according to manufacturer's directions.	
13.09	Select rods and wrap hair, if required, according to manufacturer's directions.	
13.10	Apply processing solution and process, take test curls.	
13.11	Rinse, blot, shampoo and/or neutralize.	
13.12	Remove rods, condition and style, record results.	
13.13	Apply leave-on treatment, if required.  Record results.	
14.0	Identify and apply temporary/semi-permanent and permanent color/bleach and specialty color techniques – the student will be able to:	
14.01	Perform patch test (pre-disposition), if required.	
14.02	Prepare client, determine needs and desires (consultation).	
14.03	Analyze scalp and hair.	
14.04	Select and assemble appropriate solutions according to hair texture and desired results.	
14.05	Section hair, if required.	
14.06	Mix, if required, and apply color, toner, and/or bleach according to manufacturer's directions.	
14.07	Perform strand tests.	
14.08	Identify and perform specialty-coloring techniques.	
14.09	Shampoo before or after applying color according to manufacturer's directions.  Record results.	
14.10	Understand molecular reactions as a result of physical and chemical changes.	
14.11	Draw conclusions or make inferences from data.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Special Notes

MyCareerShines is an interactive resource to assist students in identifying their ideal career and to enhance preparation for employment. Teachers are encouraged to integrate this resource into the program curriculum to meet the employability goals for each student.  Access MyCareerShines by visiting: www.mycareershines.org.

Career and Technical Student Organization (CTSO)

SkillsUSA, Inc. is the appropriate career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Basic Skills (if applicable)

In PSAV programs offered for 450 hours or more, in accordance with Rule 6A-10.040, F.A.C., the minimum basic skills grade levels required for postsecondary adult career and technical students to complete this program are:  Mathematics 8, Language 8 and Reading 9.  These grade level numbers correspond to a grade equivalent score obtained on a state designated basic skills examination.  

Adult students with disabilities, as defined in Section 1004.02(7), Florida Statutes, may be exempted from meeting the Basic Skills requirements (Rule 6A-10.040).  Students served in exceptional student education (except gifted) as defined in s. 1003.01(3)(a), F.S., may also be exempted from meeting the Basic Skills requirement.  Each school district and Florida College must adopt a policy addressing procedures for exempting eligible students with disabilities from the Basic Skills requirement as permitted in Section 1004.91(3), F.S.

Students who possess a college degree at the Associate of Applied Science level or higher; who have completed or are exempt from the college entry-level examination; or who have passed a state, national, or industry licensure exam are exempt from meeting the Basic Skills requirement (Rule 6A-10.040, F.A.C.) Exemptions from state, national or industry licensure are limited to the certifications listed on the Basic Skills and Licensure Exemption List which may be accessed from the CTE Program Resources page.

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml