2018 - 2019
Florida Department of Education
Curriculum Framework 

Program Title:	Film Production Equipment Operations
Program Type:	Career Preparatory
Career Cluster:	Arts, A/V Technology and Communication

NOTE: This program has been daggered for deletion with 2018-2019 being the last cohort of students permitted to enroll in the program. After 2018-2019, no new students may be enrolled in this program. Students already enrolled in the program may continue taking courses in the program until completion.

PSAV	
Program Number	I100112	
CIP Number	0650060212	
Grade Level	30, 31	
Standard Length	1600 hours	
Teacher Certification	Refer to the Program Structure section.	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	27-4031 – Camera Operators, Television, Video, and Motion Picture
27-4032 – Film and Video Editors
27-4011 – Audio and Video Equipment Technicians
27-4014 – Sound Engineering Technicians
27-1027 – Set and Exhibit Designers	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	
Basic Skills Level	Mathematics:	9
Language:	9
Reading: 	9	

Purpose

The purpose of this program is to prepare students for initial employment in film production equipment operation occupations, as camera assistants, sound equipment operators, editing equipment operators, set builders, grips and lighting equipment operators.

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Arts, A/V Technology and Communication career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Arts, A/V Technology and Communication career cluster. 
The content of this course includes, but is not limited to the construction and installation of theatrical scenery; planning, implementing, and running the technical aspects of a film production; exploring the interrelationship between creative and craft-based skills; the operation of audio equipment; and the execution of various pre-production, production, and post-production tasks.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of five occupational completion points.

This program is comprised of courses which have been assigned course numbers in the SCNS (Statewide Course Numbering System) in accordance with Section 1007.24 (1), F.S.  Career and Technical credit shall be awarded to the student on a transcript in accordance with Section 1001.44(3)(b), F.S.

To teach the courses listed below, instructors must hold at least one of the teacher certifications indicated for that course.

The following table illustrates the postsecondary program structure:

OCP	Course Number	Course Title	Teacher Certification	Length	SOC Code	
A	FIL0080	Set Builder/Prop Maker	TEC ELEC @7  7G
TV PRO TEC @7  7G	300 hours	27-1027	
B	FIL0081	Sound Equipment Operator		250 hours	27-4014	
C	FIL0082	Grips and Lighting Equipment Operator		330 hours	27-4011	
D	FIL0083	Editing Equipment Operator		360 hours	27-4032	
E	FIL0084	Camera Assistant		360 hours	27-4031	

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Construct and install theatrical scenery to the specifications required in a scene design for a film production.
02.0	Function as part of a technical support team in planning, implementing and running the technical aspects of film production.
03.0	Be knowledgeable of the interrelationship which exists between the various creative and craft skills required for film production.
04.0	Operate audio equipment for film productions.
05.0	Execute the audio requirements for film productions.
06.0	Execute pre-production, production and post-production tasks for the area of gripping.
07.0	Execute pre-production, production and post-production tasks for the area of film lighting.
08.0	Execute pre-production, production and post-production tasks for the area of film editing equipment operation.
09.0	Execute pre-production, production and post-production tasks for the area of camera assisting.
10.0	

2018 - 2019
Florida Department of Education
Student Performance Standards

Program Title:	Film Production Equipment Operations
PSAV Number:	I100112

Course Number:  FIL0080
Occupational Completion Point:  A
Set Builder/Prop Maker – 300 Hours – SOC Code 27-1027	
01.0	Construct and install theatrical scenery to the specifications required in a scene design for a film production – the student will be able to:	
01.01	Purchase appropriate materials and hardware for scenic construction.	
01.02	Construct common flat scenery.	
01.03	Construct three-dimensional scenery.	
01.04	Execute application techniques used in painting scenery.	
01.05	Construct special effects scenery.	
01.06	Schedule and organize transportation of scenery to remote locations.	
01.07	Supervise scene shop activities.	
02.0	Function as part of a technical support team in planning, implementing and running the technical aspects of film production – the student will be able to:	
02.01	Perform as a member of a technical support team within the framework of an organized film production.	
02.02	Execute job assignments in order to meet production deadlines.	
02.03	Execute technical needs to apply accepted principles of film technology to production situation(s).	
03.0	Be knowledgeable of the interrelationship which exists between the various creative and craft skills required for film production – the student will be able to:	
03.01	Differentiate the working relationships that exist between the various participants involved in the filmmaking process.	
03.02	Demonstrate the proper use of standard filmmaking forms.	
03.03	Define the specific technical processes used by the camera, grip, lighting, sound, art, costume, special effects, make-up and editing.	
03.04	Execute strategies for meeting the technical requirements of a film production crew.	
	
Course Number:  FIL0081
Occupational Completion Point:  B
Sound Equipment Operator – 250 Hours – SOC Code 27-4014	
04.0	Operate audio equipment for film productions – the student will be able to:	
04.01	Operate sound reinforcement systems to meet performance needs.	
04.02	Operate various audio equipment to achieve proper sound mix on an audio mixer	
04.03	Perform transactions with audio suppliers.	
04.04	Execute the design for proper microphone and speaker placement.	
05.0	Execute the audio requirements for film productions – the student will be able to:	
05.01	Execute strategies for recording production film sound to acceptable industry standards.	
05.02	Record production and post-production sound.	
05.03	Work as a member of a film production team.	
05.04	Develop appropriate industry contacts.	
05.05	Assist in analyzing audio needs for film production to perform transactions with suppliers.	

Course Number:  FIL0082
Occupational Completion Point:  C
Grips and Lighting Equipment Operator – 330 Hours – SOC Code 27-4011	
06.0	Execute pre-production, production and post-production tasks for the area of gripping – the student will be able to:	
06.01	Execute strategies to properly utilize grip equipment during film production.	
06.02	Accept directions in the placement of dollies, cranes and other camera mounts as required for film production.	
06.03	Execute pre- and post-production routines.	
06.04	Work as a member of a film production team.	
06.05	Develop appropriate industry contacts.	
06.06	Demonstrate safe work habits.	
06.07	Assist in determining grip equipment needs.	
06.08	Execute required effects for lighting set-ups.	
07.0	Execute pre-production, production and post-production tasks for the area of film lighting – the student will be able to:	
07.01	Utilize standard film lighting equipment to production specifications.	
07.02	Execute a power distribution system for film lighting equipment.	
07.03	Execute pre- and post-production routines necessary for the lighting department.	
07.04	Work as a member of a film production team.	
07.05	Create a safe working environment.	
07.06	Develop appropriate industry contacts.	
07.07	Execute production requirements to determine lighting equipment and maintenance needs.	
07.08	Execute required lighting effects for film shooting.	
07.09	Hang, connect and focus lights for a production.	
	
Course Number:  FIL0083
Occupational Completion Point:  D
Editing Equipment Operator – 360 Hours -- SOC Code 27-4032	
08.0	Execute pre-production, production and post-production tasks for the area of film editing equipment operation – the student will be able to:	
08.01	Operate editing equipment.	
08.02	Execute standard editing room routines.	
08.03	Execute required editing room documentation.	
08.04	Work as a member of a film production team.	
08.05	Develop appropriate industry contacts.	
08.06	Work with suppliers and film laboratories.	
08.07	Execute editing sequences using industry standard equipment.	

Course Number:  FIL0084
Occupational Completion Point:  E
Camera Assistant – 360 Hours -- SOC Code 27-4031	
09.0	Execute pre-production, production and post-production tasks for the area of camera assisting – the student will be able to:	
09.01	Assist in the execution of shooting activities using standard industry camera equipment.	
09.02	Assist in shooting activities required for appropriate camera department documentation.	
09.03	Execute the proper care and handling of camera and camera assistant equipment.	
09.04	Work as a member of a film production team.	
09.05	Develop appropriate industry contacts.	
09.06	Assist in analyzing production requirements to determine camera equipment needs.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Special Notes

MyCareerShines is an interactive resource to assist students in identifying their ideal career and to enhance preparation for employment. Teachers are encouraged to integrate this resource into the program curriculum to meet the employability goals for each student.  Access MyCareerShines by visiting: www.mycareershines.org.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization(s) providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Basic Skills (if applicable)

In PSAV programs offered for 450 hours or more, in accordance with Rule 6A-10.040, F.A.C., the minimum basic skills grade levels required for postsecondary adult career and technical students to complete this program are:  Mathematics 9, Language 9, and Reading 9.  These grade level numbers correspond to a grade equivalent score obtained on a state designated basic skills examination.  

Adult students with disabilities, as defined in Section 1004.02(7), Florida Statutes, may be exempted from meeting the Basic Skills requirements (Rule 6A-10.040).  Students served in exceptional student education (except gifted) as defined in s. 1003.01(3)(a), F.S., may also be exempted from meeting the Basic Skills requirement.  Each school district and Florida College must adopt a policy addressing procedures for exempting eligible students with disabilities from the Basic Skills requirement as permitted in Section 1004.91(3), F.S.

Students who possess a college degree at the Associate of Applied Science level or higher; who have completed or are exempt from the college entry-level examination; or who have passed a state, national, or industry licensure exam are exempt from meeting the Basic Skills requirement (Rule 6A-10.040, F.A.C.) Exemptions from state, national or industry licensure are limited to the certifications listed on the Basic Skills and Licensure Exemption List which may be accessed from the CTE Program Resources page.

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml