2016 – 2017
Florida Department of Education
Curriculum Framework 

Program Title:	Motorcycle Service Technology
Program Type:	Career Preparatory
Career Cluster:	Transportation, Distribution and Logistics

NOTE: This program has been daggered for deletion with 2017-2018 being the last cohort of students permitted to enroll in the program. After 2017-2018, no new students may be enrolled in this program. Students already enrolled in the program may, at the District’s discretion, continue taking courses in the program until completion.

PSAV – Career Preparatory	
Program Number	I470616	
CIP Number	0647060601	
Grade Level	30, 31	
Standard Length	1500 hours	
Teacher Certification	MOTORCYCLE @7 7G	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-3052 – Motorcycle Mechanics	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	
Basic Skills Level	Mathematics:	10
Language:	  9
Reading:	10	

Purpose

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the Transportation, Distribution and Logistics career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the Transportation, Distribution and Logistics career cluster. 

The content includes but is not limited to the motorcycle services technology industry, and demonstrates such elements of the industry as planning, management, finance, technical and production skills, underlying principles of technology, labor issues, community issues, and health, safety, and environmental issues.

Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of four occupational completion points.

This program is comprised of courses which have been assigned course numbers in the SCNS (Statewide Course Numbering System) in accordance with Section 1007.24 (1), F.S.  Career and Technical credit shall be awarded to the student on a transcript in accordance with Section 1001.44 (3) (b), F.S.

The following table illustrates the PSAV program structure:

OCP	Course Number	Course Title	Course Length	SOC Code	
A	MOM0001	Assembler (Setup)	150 hours	49-3052	
B	MOM0002	Parts Clerk	200 hours	49-3052	
C	MOM0100	Helper, Mechanic	400 hours	49-3052	
D	MOM0400	Motorcycle Mechanic	750 hours	49-3052	

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students. These practices are not exclusive to a Career Pathway, program of study, discipline or level of education. Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Recognize personal and industry safety requirements.
02.0	Verify the proper use and care of basic shop tools and equipment.
03.0	Outline the appropriate set-up procedures.
04.0	Show proficiency in performing routine preventative maintenance services.
05.0	Compare and contrast the differences in the measurement systems, fasteners and thread repair.
06.0	Illustrate industry-related math skills.
07.0	Show proficiency in parts inventory identification and repair order processing. 
08.0	Perform basic services and minor repairs.
09.0	Perform basic frame and suspension service.
10.0	Perform basic electrical system service.
11.0	Diagnose, service and repair cooling systems.
12.0	Diagnose, repair and recondition basic engine components.
13.0	Apply industry-related science to motorcycle service.
14.0	Diagnose, service and repair frames and suspension components.
15.0	Diagnose, service and repair wheels, tires, and brakes.
16.0	Diagnose, service and repair drive trains.
17.0	Diagnose, service and repair fuel and exhaust systems.
18.0	Troubleshoot and repair electrical-system components.
19.0	Tune up motorcycles.
20.0	Diagnose, repair, and recondition engines.
21.0	Demonstrate the proper use of industry tools and equipment.
22.0	

2016 – 2017
Florida Department of Education
Student Performance Standards

Program Title:	Motorcycle Service Technology 
PSAV Number:	I470616

Course Number:  MOM0001
Occupational Completion Point:  A 
Assembler (Setup) – 150 Hours – SOC Code 49-3052 

Course Description:
The Assembler (Setup) course prepares students for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study safety requirements, tools and equipment, set-up procedures, and routine preventative maintenance.

CTE Standards and Benchmarks	
01.0	Recognize personal and industry safety requirements--The student will be able to:	
01.01	List the federal and state standards for health and safety, including OSHA and the "Right‑to‑Know" law. 	
01.02	Outline the safety requirements for shop organization and management.	
01.03	Recognize the safety requirements for the use of industry tools and equipment.	
01.04	List the fire-safety precautions.	
01.05	Recognize electrical-safety precautions.	
02.0	Verify the proper use and care of basic shop tools and equipment--The student will be able to:	
02.01	Categorize general and specialized hand tools.	
02.02	Examine and use power tools.	
02.03	Classify and use fasteners.	
02.04	Document proper use of air tools.	
02.05	Utilize oxy-acetylene welding outfit for heating, welding, brazing and cutting.	
02.06	Use heating devices to perform service procedures.	
03.0	Outline the appropriate set-up procedures--The student will be able to:	
03.01	Inspect and interpret vehicle identification number information.	
03.02	Inspect tires; check and adjust air pressure.	
03.03	Check for proper fluid levels.	
03.04	Utilize electrical test equipment to isolate defective components and check lamp circuits.	
03.05	Inspect and fill battery.	
03.06	Clean engine.	
03.07	Install cables, hoses and electrical assemblies.	
03.08	Inspect cables, connectors, clamps and hold-downs; adjust as necessary.	
03.09	Read and interpret a wiring diagram.	
03.10	Troubleshoot and repair wiring harnesses.	
04.0	Show proficiency in performing routine preventative maintenance services--The student will be able to:	
04.01	Compare and contrast typical motorcycle lubricants and lubricant properties.	
04.02	Inspect and test head and tail lamp circuits; aim headlights and replace bulbs.	
04.03	Inspect battery terminals and the state-of-charge test; perform slow/fast battery charge.	
04.04	Inspect and clean battery cables, connectors, clamps and hold-downs; repair or replace as needed.	
04.05	Inspect and test fusible links, circuit breakers and fuses; replace as needed.	
04.06	Check radiator coolant level (if applicable), test and add coolant.	
04.07	Check fluid levels and change fluids and the tightness of the oil filters.	

2016 – 2017

Florida Department of Education
Student Performance Standards

Course Number:  MOM0002
Occupational Completion Point:  B 
Parts Clerk – 200 Hours – SOC Code 49-3052 

Course Description:
The Parts Clerk course is designed to build on the skills and knowledge students learned in Assembler (Setup) course for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study measurement systems, fasteners, thread repair, math, parts inventory, and repair ordering.

CTE Standards and Benchmarks	
05.0	Compare and contrast the differences in the measurement systems, fasteners and thread repair--The student will be able to:	
05.01	Describe and distinguish the different types of measurement systems.	
05.02	Compare and contrast the different types of fasteners.	
05.03	Explain the steps of inspecting, cleaning and replacement of broken fasteners.	
05.04	Describe the sequence of tightening and torqueing fasteners to specs.	
05.05	Compare and contrast the different stress fractures of fasteners	
06.0	Illustrate industry-related math skills--The student will be able to:	
06.01	Measure tolerance(s) using millimeters and inches.	
06.02	Perform metric to SAE and SAE to metric conversions.	
06.03	Perform correct measurements using different precise metering tools. T handle measuring tool.	
06.04	Perform correct measures using Vernier Calipers.	
06.05	Perform correct measures using Micrometers.	
07.0	Show proficiency in parts inventory identification and repair order processing--The student will be able to:	
07.01	Read and interpret information in parts and service manuals and other technical media.	
07.02	Read and understand graphs, charts, diagrams and tables commonly used in the industry.	
07.03	Write and process work orders.	
07.04	Prepare cost estimates for jobs using service and flat-rate standards.	
07.05	Perform basic parts inventory tracking with the latest computer updates.	
07.06	Interpret and verify complaint; determine needed repairs. If find more than first estimated ask customer if ok to do repairs.	

2016 – 2017

Florida Department of Education
Student Performance Standards

Course Number:  MOM0100
Occupational Completion Point:  C 
Helper, Mechanic – 400 Hours – SOC Code 49-3052 

Course Description:
The Helper, Mechanic course is designed to build on the skills and knowledge students learned in Parts Clerk course for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study basic services and minor repairs, basic frame, suspension, electrical, cooling, and engine components.

CTE Standards and Benchmarks	
08.0	Perform basic services and minor repairs--The student will be able to:	
08.01	Identify, select and use appropriate replacement parts.	
08.02	Clean or replace after inspection of air filtration.	
08.03	Service and check batteries, if not charging then replace.	
08.04	Service lubrication systems.	
08.05	Name the components of air and liquid cooling systems by name and function.	
08.06	Remove, remount and balance tires.	
08.07	Diagnose, service and repair chain and belt final drive components.	
09.0	Perform basic frame and suspension service--The student will be able to:	
09.01	Categorize the different front- and rear-suspension systems and explain their operation.	
09.02	Compare the parts and functions of different frames and suspension systems.	
09.03	Explain how wheels, tires and suspension affect chassis performance and driveability.	
09.04	Replace and true a wheel assembly.	
09.05	Diagnose and service wheel bearings and seals.	
10.0	Perform basic electrical system service--The student will be able to:	
10.01	Assess and use basic electrical system test equipment.	
10.02	Use basic DC electrical theory to select appropriate test procedures.	
10.03	Inspect and test fusible links, circuit breakers and fuses; replace as needed.	
10.04	Check electrical circuits with a test light; determine needed repairs.	
10.05	Troubleshoot and repair battery-operated electronic ignition systems.	
10.06	Troubleshoot and repair magneto-ignition systems.	
10.07	Troubleshoot and repair capacitive-discharge-ignition (CDI) systems.	
10.08	Troubleshoot and repair half-wave and full-wave charging systems.	
10.09	Troubleshoot and repair three-phase charging systems.	
10.10	Troubleshoot and repair electrical starter systems.	
10.11	Troubleshoot and repair Direct-Current (DC) Generators.	
10.12	Troubleshoot and repair Warning systems.	
11.0	Diagnose, service, and repair cooling systems--The student will be able to:	
11.01	Categorize the components of air and liquid cooling systems by name and function.	
11.02	Diagnose service and repair air-cooling systems.	
11.03	Diagnose service and repair liquid cooling systems.	
12.0	Diagnose, repair and recondition basic engine components--The student will be able to:	
12.01	Explain the engine operating theory.	
12.02	Recondition a two-stroke engine top-end.	
12.03	Recondition a single-cylinder four-stroke engine top-end.	
12.04	Recondition a multi-cylinder four-stroke engine top-end.	
12.05	Rebuild a four-stroke head.	
12.06	Recondition a single-cylinder four-stroke engine bottom-end.	
12.07	Recondition a multi-cylinder four-stroke engine bottom-end.	
12.08	Recondition a two-stroke engine bottom-end.	
12.09	Service a plain-bearing crankshaft.	
12.10	Diagnose and repair oil-delivery systems.	

2016 – 2017

Florida Department of Education
Student Performance Standards

Course Number:  MOM0400
Occupational Completion Point:  D
Motorcycle Mechanic – 750 Hours – SOC Code 49-3052 

Course Description:
The Motorcycle Mechanic course is designed to build on the skills and knowledge students learned in Helper, Mechanic course for entry into the motorcycle service industry. Students explore career opportunities and requirements of a professional motorcycle mechanic. Students study science of motorcycles, frames, suspension systems, wheels, tires, brakes, drive trains, fuel, exhaust systems, troubleshooting and repair of electrical system components, study tune-up, engine reconditioning, and proper use of industry tools/equipment.

CTE Standards and Benchmarks	
13.0	Apply industry-related science to motorcycle service--The student will be able to:	
13.01	Explain how temperature extremes, chemical reactions and moisture content affect motorcycle systems.	
13.02	Draw conclusions or make inferences from data.	
14.0	Diagnose, service, and repair frames and suspension components--The student will be able to:	
14.01	Service and repair front suspension.	
14.02	Service and repair rear suspension.	
14.03	Inspect, remove, and replace frames.	
15.0	Diagnose, service, and repair wheels, tires and brakes--The student will be able to:	
15.01	Diagnose and repair mechanical disc and drum brake systems and components.	
15.02	Diagnose and repair hydraulic disc and drum brake systems and components.	
15.03	Diagnose and repair ABS braking systems and other advanced stopping systems.	
16.0	Diagnose, service, and repair drive trains--The student will be able to:	
16.01	Diagnose, service, and repair primary-drive systems.	
16.02	Diagnose, service, and repair clutch assemblies.	
16.03	Diagnose, service, and repair transmissions.	
16.04	Diagnose, service, and repair shaft drives.	
16.05	Diagnose and repair kickstart systems.	
17.0	Diagnose, service, and repair fuel and exhaust systems--The student will be able to:	
17.01	Identify components and operation of carburetion and fuel-injection systems.	
17.02	Diagnose, service, and repair slide-type carburetors.	
17.03	Diagnose, service, and repair constant-velocity-type (CV-type) carburetors.	
17.04	Diagnose, service, and repair fixed-venturi carburetors.	
17.05	Diagnose, service, and repair fuel-injection systems.	
17.06	Diagnose service and repair exhaust systems replace necessary components as needed.	
17.07	Diagnose, service, and repair other fuel-delivery-system components.	
18.0	Troubleshoot and repair electrical-system components--The student will be able to:	
18.01	Utilize electrical test equipment to isolate defective components.	
18.02	Read and interpret a wiring diagram.	
18.03	Troubleshoot and repair wiring harnesses.	
18.04	Troubleshoot and repair battery/points ignition systems.	
18.05	Troubleshoot and repair battery-operated electronic ignition systems.	
18.06	Troubleshoot and repair magneto-ignition systems.	
18.07	Troubleshoot and repair capacitive-discharge-ignition (CDI) systems.	
18.08	Troubleshoot and repair half-wave and full-wave charging systems.	
18.09	Troubleshoot and repair three-phase charging systems.	
18.10	Troubleshoot and repair electrical starter systems.	
18.11	Troubleshoot and repair direct current (DC) generators.	
18.12	Troubleshoot and repair warning systems.	
19.0	Tune up motorcycles--The student will be able to:	
19.01	Diagnose driveability problems.	
19.02	Adjust the cam chain tension.	
19.03	Adjust the valve clearances.	
19.04	Replace the ignition points, condenser, and spark plugs.	
19.05	Check and set the ignition timing.	
19.06	Adjust the carburetor and service the fuel-delivery systems.	
19.07	Service the air-filtration systems.	
19.08	Service and diagnose batteries.	
19.09	Service the lubrication systems.	
20.0	Diagnose, repair, and recondition engines--The student will be able to:	
20.01	Explain the engine operating theory.	
20.02	Recondition a single-cylinder four-stroke engine top-end.	
20.03	Recondition a multi-cylinder four-stroke engine top-end.	
20.04	Recondition a two-stroke engine top-end.	
20.05	Rebuild a four-stroke head.	
20.06	Recondition a single-cylinder four-stroke engine bottom-end.	
20.07	Recondition a multi-cylinder four-stroke engine bottom-end.	
20.08	Recondition a two-stroke engine bottom-end.	
20.09	Rebuild a built-up crankshaft.	
20.10	Service a plain-bearing crankshaft.	
20.11	Diagnose and repair electric-starter drive systems.	
20.12	Diagnose and repair oil-delivery systems.	
21.0	Demonstrate the proper use of industry tools and equipment--The student will be able to:	
21.01	Utilize oxyacetylene welding outfit for heating, welding, brazing and cutting.	
21.02	Use heating devices to perform service procedures.	
21.03	Recondition cylinders.	

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students. 

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Basic Skills

In PSAV programs offered for 450 hours or more, in accordance with Rule 6A-10.040, F.A.C., the minimum basic skills grade levels required for postsecondary adult career and technical students to complete this program are: Mathematics 10.0, Language 9.0, and Reading 10.0. These grade level numbers correspond to a grade equivalent score obtained on a state designated basic skills examination.  

Adult students with disabilities, as defined in Section 1004.02(7), Florida Statutes, may be exempted from meeting the Basic Skills requirements (Rule 6A-10.040). Students served in exceptional student education (except gifted) as defined in s. 1003.01(3)(a), F.S., may also be exempted from meeting the Basic Skills requirement. Each school district and Florida College must adopt a policy addressing procedures for exempting eligible students with disabilities from the Basic Skills requirement as permitted in Section 1004.91(3), F.S.

Students who possess a college degree at the Associate of Applied Science level or higher; who have completed or are exempt from the college entry-level examination; or who have passed a state, national, or industry licensure exam are exempt from meeting the Basic Skills requirement (Rule 6A-10.040, F.A.C.) Exemptions from state, national or industry licensure are limited to the certifications listed on the Basic Skills and Licensure Exemption List which may be accessed from the CTE Program Resources page.

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities to meet individual needs and ensure equal access. Postsecondary students with disabilities must self-identify, present documentation, request accommodations if needed, and develop a plan with their counselor and/or instructors. Accommodations received in postsecondary education may differ from those received in secondary education. Accommodations change the way the student is instructed. Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems. Documentation of the accommodations requested and provided should be maintained in a confidential file.

Note: postsecondary curriculum and regulated secondary programs cannot be modified.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml