2016 – 2017
Florida Department of Education
Curriculum Framework 

Program Title:	Turbine Generator Maintenance, Inspection and Repair
Program Type:	Career Preparatory
Career Cluster:	Energy

NOTE: This program has been daggered for deletion due to low/ no enrollment. There will be no new enrollments for the 2016-2017 year and beyond. 

Secondary – Career Preparatory	
Program Number	9700500	
CIP Number	0715050304	
Grade Level	9-12, 30, 31	
Standard Length	9 Credits	
Teacher Certification	TEC CONSTR @7 7G
MILLWRIGHT 7 G
BLDG CONST @7 7G
IND ENGR 7 G	
CTSO	SkillsUSA	
SOC Codes (all applicable) 	49-9041 - Industrial Machinery Mechanics
49-9071 - Maintenance and Repair Workers
51-8013 - Power Plant Operators	
CTE Program Resources 	http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml	

Purpose 

The purpose of this program is to prepare students to work in power plants. 

This program offers a sequence of courses that provides coherent and rigorous content aligned with challenging academic standards and relevant technical knowledge and skills needed to prepare for further education and careers in the energy career cluster; provides technical skill proficiency, and includes competency-based applied learning that contributes to the academic knowledge, higher-order reasoning and problem-solving skills, work attitudes, general employability skills, technical skills, and occupation-specific skills, and knowledge of all aspects of the energy career cluster.  This program offers a broad foundation of knowledge and skills to prepare students for employment in industrial-machinery maintenance positions.  

The content includes but is not limited to understanding all aspects of the industrial-turbine generator equipment maintenance-technology industry, and demonstrates elements of the industry such as planning, management, cost management skills, technical and production skills, underlying principles of technology, labor issues, and health, safety, and environmental issues. Additional Information relevant to this Career and Technical Education (CTE) program is provided at the end of this document.

Program Structure

This program is a planned sequence of instruction consisting of three occupational completion points.

The following table illustrates the secondary program structure:

OCP	Course Number	Course Title	Length	SOC Code	Level	Graduation Requirement	

A	9700510
9700520
9700530	Turbine Generator Maintenance Skills 1
Turbine Generator Maintenance Skills 2
Turbine Generator Maintenance Skills 3	1 Credit
1 Credit
1 Credit	

49-9071	2
2
2	VO
VO
VO	

B	9700540
9700550
9700560	Turbine Generator Maintenance 4
Turbine Generator Maintenance 5
Turbine Generator Maintenance 6	1 Credit
1 Credit
1 Credit	

49-9041	2
2
2	VO
VO
VO	

C	9700570
9700580
9700590	Turbine Generator Mechanic 7
Turbine Generator Mechanic 8
Turbine Generator Mechanic 9	1 Credit
1 Credit
1 Credit	

51-8013	2
2
2	VO
VO
VO	
(EQ= Equally Rigorous Science, PA= Practical Arts, EC= Economics, VO= Career and Technical Education)

Academic Alignment Tables

Academic alignment is an ongoing, collaborative effort of professional educators specializing in the fields of science, mathematics, English/language arts, and Career and Technical Education (CTE). This initiative supports CTE programs by improving student performance through the integration of academic content within CTE courses. Career and Technical Education courses that have been aligned to the Next Generation Sunshine State Standards for Science and the Florida Standards for Mathematics and English/Language Arts will show the following data: the quantity of academic standards in the CTE course; the total number of standards contained in the academic course; and the percentage of alignment to the CTE course.

Courses	Anatomy/ Physiology
Honors	Astronomy     Solar/Galactic Honors	Biology 1	Chemistry 1	Earth-Space Science	Environmental Science	Genetics	Integrated Science	Marine Science 1 Honors	Physical Science	Physics 1	
9700510	**	**	**	**	**	**	**	**	**	**	**	
9700520	**	**	**	**	**	**	**	**	**	**	**	
9700530	**	**	**	**	**	**	**	**	**	**	**	
9700540	**	**	**	**	**	**	**	**	**	**	**	
9700550	**	**	**	**	**	**	**	**	**	**	**	
9700560	**	**	**	**	**	**	**	**	**	**	**	
9700570	**	**	**	**	**	**	**	**	**	**	**	
9700580	**	**	**	**	**	**	**	**	**	**	**	
9700590	**	**	**	**	**	**	**	**	**	**	**	
**   Alignment pending review    						#   Alignment attempted, but no correlation to academic course

Courses	Algebra 1	Algebra 2	Geometry	English 1	English 2	English 3	English 4	
9700510	**	**	**	**	**	**	**	
9700520	**	**	**	**	**	**	**	
9700530	**	**	**	**	**	**	**	
9700540	**	**	**	**	**	**	**	
9700550	**	**	**	**	**	**	**	
9700560	**	**	**	**	**	**	**	
9700570	**	**	**	**	**	**	**	
9700580	**	**	**	**	**	**	**	
9700590	**	**	**	**	**	**	**	
**   Alignment pending review    			#   Alignment attempted, but no correlation to academic course

Florida Standards for Technical Subjects 

Florida Standards (FS) for English Language Arts and Literacy in History/Social Studies, Science, and Technical Subjects are the critical reading and writing literacy standards designed for grade 6 and above.  These standards are predicated on teachers of history/social studies, science, and technical subjects using their content area expertise to help students meet the particular challenges of reading, writing, speaking, listening, and language in their respective fields.  It is important to note that the 6-12 literacy standards in history/social studies, science, and technical subjects are not meant to replace content standards in those areas but rather to supplement them.

This curriculum framework incorporates the grades 9-10 reading and writing literacy standards in the first two courses of this CTE program and grade 11-12 reading and writing literacy standards in the third and fourth courses of this CTE program.  The standards for Mathematical Practices describe varieties of expertise that educators at all levels should seek to develop in their students.  These practices rest on important “processes and proficiencies” with longstanding importance in mathematics education.  This curriculum framework incorporates the appropriate mathematical practices in the first four courses of this CTE program.  

Florida Standards for English Language Development (ELD)
English language learners communicate for social and instructional purposes within the school setting. ELD.K12.SI.1.1 

English Language Development (ELD) Standards Special Notes:
Teachers are required to provide listening, speaking, reading and writing instruction that allows English language learners (ELL) to communicate for social and instructional purposes within the school setting.   For the given level of English language proficiency and with visual, graphic, or interactive support, students will interact with grade level words, expressions, sentences and discourse to process or produce language necessary for academic success. The ELD standard should specify a relevant content area concept or topic of study chosen by curriculum developers and teachers which maximizes an ELL’s need for communication and social skills. To access an ELL supporting document which delineates performance definitions and descriptors, please click on the following link: http://www.cpalms.org/uploads/docs/standards/eld/SI.pdf.
For additional information on the development and implementation of the ELD standards, please contact the Bureau of Student Achievement through Language Acquisition at sala@fldoe.org.

Common Career Technical Core – Career Ready Practices

Career Ready Practices describe the career-ready skills that educators should seek to develop in their students.  These practices are not exclusive to a Career Pathway, program of study, discipline or level of education.  Career Ready Practices should be taught and reinforced in all career exploration and preparation programs with increasingly higher levels of complexity and expectation as a student advances through a program of study. 

1. Act as a responsible and contributing citizen and employee. 

2. Apply appropriate academic and technical skills. 

3. Attend to personal health and financial well-being. 

4. Communicate clearly, effectively and with reason. 

5. Consider the environmental, social and economic impacts of decisions. 

6. Demonstrate creativity and innovation. 

7. Employ valid and reliable research strategies. 

8. Utilize critical thinking to make sense of problems and persevere in solving them. 

9. Model integrity, ethical leadership and effective management. 

10. Plan education and career path aligned to personal goals. 

11. Use technology to enhance productivity. 

12. Work productively in teams while using cultural/global competence. 

Standards

After successfully completing this program, the student will be able to perform the following:

01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair. 
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.
04.0	Demonstrate the importance of health, safety and environmental management systems in organizations and their importance to organizational performance and regulatory compliance.
05.0	Demonstrate science knowledge and skills and explain the basic elements of physics as related to industrial machinery maintenance and repair.	
06.0	Explain basic electricity and electronics.
07.0	Demonstrate mathematics knowledge and skills.
08.0	Read plans and drawings and identify basic turbine generator nomenclature.
09.0	Recognize turbine and generator components and subcomponents and describe their function.
10.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.
11.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.
12.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.
13.0	Plan a turbine generator component inspection.
14.0	Use turbine generator tooling to maintain and make repairs to Hy-Torq, impact and other hydraulic tools.
15.0	Demonstrate application of lubricants and lubricating systems.
16.0	Explain the various fastening mechanisms used on turbine and generator components.
17.0	Demonstrate tightening operations on high pressure flanges and cylinders.
18.0	Remove galled bolting and repair of damaged threads.
19.0	Disassemble and reassemble high speed turbines and generators.
20.0	Perform machine-shop operations.
21.0	Demonstrate piping and tubing systems.
22.0	Understand basic operation of a steam turbine and generator.
23.0	Perform pump maintenance and repair.
24.0	Prepare for machinery startup.
25.0	Perform measuring and rotor alignment operations.
26.0	Demonstrate Predictive-Preventive-Maintenance (PPM) technologies using a borescope.
27.0	Perform failure analysis.
28.0	Generate machine improvements and maintenance management.
29.0	Perform bench work skills including breakdown and inspection of control valve components.
30.0	Perform non-destructive examination of turbine components.
31.0	Understand principals of generator operation and testing.
32.0	Troubleshoot hydraulic systems.
33.0	Apply vibration-analysis skills.
34.0	Perform machinery balancing.

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance Skills 1
Course Number: 	9700510
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include a safe working environment, science and math skills, electricity and electronics skills along with basic turbine generator nomenclature. 

Florida Standards	Correlation to CTE Program Standard #	
01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
01.01	Key Ideas and Details		
01.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to the precise details of explanations or descriptions.
LAFS.910.RST.1.1		
01.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.910.RST.1.2		
01.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.910.RST.1.3		
01.02	Craft and Structure		
01.02.1	Determine the meaning of symbols, key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 9–10 texts and topics.
LAFS.910.RST.2.4		
01.02.2	Analyze the structure of the relationships among concepts in a text, including relationships among key terms (e.g., force, friction, reaction force, energy).
LAFS.910.RST.2.5		
01.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, defining the question the author seeks to address.
LAFS.910.RST.2.6		
01.03	Integration of Knowledge and Ideas		
01.03.1	Translate quantitative or technical information expressed in words in a text into visual form (e.g., a table or chart) and translate information expressed visually or mathematically (e.g., in an equation) into words.
LAFS.910.RST.3.7		
01.03.2	Assess the extent to which the reasoning and evidence in a text support the author’s claim or a recommendation for solving a scientific or technical problem.
LAFS.910.RST.3.8		
01.03.3	Compare and contrast findings presented in a text to those from other sources (including their own experiments), noting when the findings support or contradict previous explanations or accounts.
LAFS.910.RST.3.9		
01.04	Range of Reading and Level of Text Complexity		
01.04.1	By the end of grade 9, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 9–10 text complexity band proficiently, with scaffolding as needed at the high end of the range.
01.04.2	By the end of grade 10, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 9–10 text complexity band independently and proficiently.
LAFS.910.RST.4.10		
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
02.01	Text Types and Purposes		
02.01.1	Write arguments focused on discipline-specific content.
LAFS.910.WHST.1.1		
02.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.910.WHST.1.2		
02.02	Production and Distribution of Writing		
02.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.910.WHST.2.4		
02.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.910.WHST.2.5		
02.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products, taking advantage of technology’s capacity to link to other information and to display information flexibly and dynamically.
LAFS.910.WHST.2.6		
02.03	Research to Build and Present Knowledge		
02.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.910.WHST.3.7		
02.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the usefulness of each source in answering the research question; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and following a standard format for citation.
LAFS.910.WHST.3.8		
02.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.910.WHST.3.9		
02.04	Range of Writing		
02.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.910.WHST.4.10		
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
03.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
03.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
03.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
03.04	Model with mathematics.
MAFS.K12.MP.4.1		
03.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
03.06	Attend to precision.
MAFS.K12.MP.6.1		
03.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
03.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
04.0	Demonstrate the importance of health, safety and environmental management systems in organizations and their importance to organizational performance and regulatory compliance--The student will be able to:			
04.01	Describe personal and jobsite safety rules and regulations that maintain safe and healthy work environments.			
04.02	Explain emergency procedures to follow in response to workplace accidents.			
04.03	Create a disaster and/or emergency response plan.			
04.04	Perform Lock-Out-and-Tag-Out (LOTO) procedures.  Understand why a LOTO system is necessary and your responsibilities in utilizing the system.			
04.05	Identify Occupational Safety and Health Administration (OSHA) and Mine Safety Health Administration (MSHA) requirements and procedures.  			
04.06	Use Materials Safety Data Sheets (MSDS) including knowing how to access the sheets and interpret them.			
05.0	Demonstrate science knowledge and skills and explain the basic elements of physics as related to industrial machinery maintenance and repair--The student will be able to:			
05.01	Discuss the role of creativity in constructing scientific questions, methods and explanations.			
05.02	Formulate scientifically investigable questions, construct investigations, collect and evaluate data, and develop scientific recommendations based on findings.				
05.03	Explain the standards of measurement and the impact of action and working forces, including tension, compression, torque and shear.			
05.04	Identify the principles and laws of motion and explain how they affect acceleration and deceleration.			
05.05	Explain the relationship of work, power, energy and the Rankine Cycle.			
05.06	Explain the operation of simple machines, including the lever, inclined plane, screw, wedge, wheel and axle, pulley, and jacking screws.			
05.07	Identify the ways of producing power for mechanical efficiency, in terms of gear ratios, work forces and the types of work done by a crane hook, forklift truck and screw or bolt.			
05.08	Demonstrate rigging and lifting principals and perform simple load/lift calculations.			
05.09	Describe the mechanical and chemical properties of materials commonly used in industry.			
05.10	Explain the laws and conditions governing static and kinetic friction, the problems caused by friction, and the effects of the angle of repose.			
05.11	Explain molecular action as a result of temperature extremes, chemical reaction and moisture content.			
05.12	Draw conclusions or make inferences from data.			
05.13	Develop a basic understanding of the steam turbine.			
05.14	Develop a basic understanding of the gas turbine.			
05.15	Develop a basic understanding of a turbo generator.			
05.16	Identify health-related problems that may result from exposure to work-related chemicals and hazardous materials, and know the proper precautions required for handling such materials.			
06.0	Explain basic electricity and electronics--The student will be able to:			
06.01	Define electrical terms.			
06.02	Explain the theory and application of magnetism.			
06.03	Explain Ohm's law.			
06.04	Describe Direct Current (DC) and Alternating Current (AC) circuits.			
06.05	Explain the purpose of a megger test and what a Polarization Index means when determining the acceptability of electrical motor and generator winding acceptability.			
06.06	Describe the various components of a generator and motor and their functions.			
06.07	Describe the various components of an exciter and their functions.			
07.0	Demonstrate mathematics knowledge and skills--The student will be able to:			
07.01	Demonstrate knowledge of arithmetic operations.			
07.02	Analyze and apply data and measurements to solve problems and interpret documents.			
07.03	Construct charts/tables/graphs using functions and data.			
07.04	Convert measurements from English to metric and from metric to English units.			
07.05	Solve job-related problems using proportions.			
07.06	Solve job-related problems using statistics.			
08.0	Read plans and drawings and identify basic turbine generator nomenclature--The student will be able to:			
08.01	Identify dimensions.			
08.02	Identify lists of materials and specifications.			
08.03	Identify section and detail views.			
08.04	Sketch and dimension a part.			
08.05	Disassemble and assemble parts using an exploded-view drawing.			
08.06	Identify dimensioning of radii, round holes, fillets and chamfers.			
08.07	Identify screw threads and bolt types.			
08.08	Apply dimensional tolerances.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance Skills 2
Course Number: 	9700520
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include using technology, solving problems; recognize turbine generator components along with leadership and teamwork skills.

Florida Standards	Correlation to CTE Program Standard #	
01.0	Methods and strategies for using Florida Standards for grades 09-10 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
01.01	Key Ideas and Details		
01.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to the precise details of explanations or descriptions.
LAFS.910.RST.1.1		
01.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.910.RST.1.2		
01.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.910.RST.1.3		
01.02	Craft and Structure		
01.02.1	Determine the meaning of symbols, key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 9–10 texts and topics.
LAFS.910.RST.2.4		
01.02.2	Analyze the structure of the relationships among concepts in a text, including relationships among key terms (e.g., force, friction, reaction force, energy).
LAFS.910.RST.2.5		
01.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, defining the question the author seeks to address.
LAFS.910.RST.2.6		
01.03	Integration of Knowledge and Ideas		
01.03.1	Translate quantitative or technical information expressed in words in a text into visual form (e.g., a table or chart) and translate information expressed visually or mathematically (e.g., in an equation) into words.
LAFS.910.RST.3.7		
01.03.2	Assess the extent to which the reasoning and evidence in a text support the author’s claim or a recommendation for solving a scientific or technical problem.
LAFS.910.RST.3.8		
01.03.3	Compare and contrast findings presented in a text to those from other sources (including their own experiments), noting when the findings support or contradict previous explanations or accounts.
LAFS.910.RST.3.9		
01.04	Range of Reading and Level of Text Complexity		
01.04.1	By the end of grade 9, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 9–10 text complexity band proficiently, with scaffolding as needed at the high end of the range.
01.04.2	By the end of grade 10, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 9–10 text complexity band independently and proficiently.
LAFS.910.RST.4.10		
02.0	Methods and strategies for using Florida Standards for grades 09-10 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
02.01	Text Types and Purposes		
02.01.1	Write arguments focused on discipline-specific content.
LAFS.910.WHST.1.1		
02.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.910.WHST.1.2		
02.02	Production and Distribution of Writing		
02.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.910.WHST.2.4		
02.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.910.WHST.2.5		
02.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products, taking advantage of technology’s capacity to link to other information and to display information flexibly and dynamically.
LAFS.910.WHST.2.6		
02.03	Research to Build and Present Knowledge		
02.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.910.WHST.3.7		
02.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the usefulness of each source in answering the research question; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and following a standard format for citation.
LAFS.910.WHST.3.8		
02.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.910.WHST.3.9		
02.04	Range of Writing		
02.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.910.WHST.4.10		
03.0	Methods and strategies for using Florida Standards for grades 09-10 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
03.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
03.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
03.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
03.04	Model with mathematics.
MAFS.K12.MP.4.1		
03.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
03.06	Attend to precision.
MAFS.K12.MP.6.1		
03.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
03.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
09.0	Recognize turbine and generator components and subcomponents and describe their  function--The student will be able to:			
09.01	Understand and explain a turbine generator outline drawing.			
09.02	Be able to identify each major component of a turbine and generator from the outline drawing and explain its function, e.g.:  cylinders, rotor, bearings and valves.			
09.03	Be able to identify and explain the function of subcomponents, e.g.:  diaphragms, buckets/blades, bearing seals, valve seats, plugs, stems.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance Skills 3
Course Number: 	9700530
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include communication skills, implementation of turbine generator skills, along with personal money management and professional responsibilities.

Florida Standards	Correlation to CTE Program Standard #	
10.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
10.01	Key Ideas and Details		
10.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to important distinctions the author makes and to any gaps or inconsistencies in the account.
LAFS.1112.RST.1.1		
10.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.1112.RST.1.2		
10.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.1112.RST.1.3		
10.02	Craft and Structure		
10.02.1	Determine the meaning of symbols key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 11–12 texts and topics.
LAFS.1112.RST.2.4		
10.02.2	Analyze how the text structures information or ideas into categories or hierarchies, demonstrating understanding of the information or ideas.
LAFS.1112.RST.2.5		
10.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, identifying important issues that remain unresolved.
LAFS.1112.RST.2.6		
10.03	Integration of Knowledge and Ideas		
10.03.1	Integrate and evaluate multiple sources of information presented in diverse formats and media (e.g. quantitative data, video, multimedia) in order to address a question or solve a problem.
LAFS.1112.RST.3.7		
10.03.2	Evaluate the hypotheses, data, analysis, and conclusions in a science or technical text, verifying the data when possible and corroborating or challenging conclusions with other sources of information.
LAFS.1112.RST.3.8		
10.03.3	Synthesize information from a range of sources (e.g., texts, experiments, simulations) into a coherent understanding of a process, phenomenon, or concept, resolving conflicting information when possible.
LAFS.1112.RST.3.9		
10.04	Range of Reading and Level of Text Complexity		
10.04.1	By the end of grade 11, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 11–CCR text complexity band proficiently, with scaffolding as needed at the high end of the range.
10.04.2	By the end of grade 12, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 11–CCR text complexity band independently and proficiently.
LAFS.1112.RST.4.10		
11.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
11.01	Text Types and Purposes		
11.01.1	Write arguments focused on discipline-specific content.
LAFS.1112.WHST.1.1		
11.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.1112.WHST.1.2		
11.02	Production and Distribution of Writing		
11.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.1112.WHST.2.4		
11.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.1112.WHST.2.5		
11.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products in response to ongoing feedback, including new arguments or information.
LAFS.1112.WHST.2.6		
11.03	Research to Build and Present Knowledge		
11.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.1112.WHST.3.7		
11.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the strengths and limitations of each source in terms of the specific task, purpose, and audience; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and overreliance on any one source and following a standard format for citation.
LAFS.1112.WHST.3.8		
11.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.1112.WHST.3.9		
11.04	Range of Writing		
11.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.1112.WHST.4.10		
12.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
12.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
12.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
12.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
12.04	Model with mathematics.
MAFS.K12.MP.4.1		
12.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
12.06	Attend to precision.
MAFS.K12.MP.6.1		
12.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
12.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
13.0	Plan a turbine generator component inspection--The student will be able to:			
13.01	Develop and explain an equipment laydown plan/drawing. 			
13.02	Develop and explain a plan (work package) for disassembly, inspection and reassembly of a turbine component, including;			
a.	Inspection hold points			
b.	Tagging plan			
c.	Estimated man-hours			
d.	Inspection data sheets			
13.03	Develop a simple critical path schedule for the inspection of a turbine generator component. 			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance 4
Course Number: 	9700540
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include identifying and using generator specific tools.  Explain how lubricants and the lubricating system functions along with various mechanical fastening systems.

Florida Standards	Correlation to CTE Program Standard #	
10.0	Methods and strategies for using Florida Standards for grades 11-12 reading in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
10.01	Key Ideas and Details		
10.01.1	Cite specific textual evidence to support analysis of science and technical texts, attending to important distinctions the author makes and to any gaps or inconsistencies in the account.
LAFS.1112.RST.1.1		
10.01.2	Determine the central ideas or conclusions of a text; trace the text’s explanation or depiction of a complex process, phenomenon, or concept; provide an accurate summary of the text.
LAFS.1112.RST.1.2		
10.01.3	Follow precisely a complex multistep procedure when carrying out experiments, taking measurements, or performing technical tasks, attending to special cases or exceptions defined in the text.
LAFS.1112.RST.1.3		
10.02	Craft and Structure		
10.02.1	Determine the meaning of symbols key terms, and other domain-specific words and phrases as they are used in a specific scientific or technical context relevant to grades 11–12 texts and topics.
LAFS.1112.RST.2.4		
10.02.2	Analyze how the text structures information or ideas into categories or hierarchies, demonstrating understanding of the information or ideas.
LAFS.1112.RST.2.5		
10.02.3	Analyze the author’s purpose in providing an explanation, describing a procedure, or discussing an experiment in a text, identifying important issues that remain unresolved.
LAFS.1112.RST.2.6		
10.03	Integration of Knowledge and Ideas		
10.03.1	Integrate and evaluate multiple sources of information presented in diverse formats and media (e.g. quantitative data, video, multimedia) in order to address a question or solve a problem.
LAFS.1112.RST.3.7		
10.03.2	Evaluate the hypotheses, data, analysis, and conclusions in a science or technical text, verifying the data when possible and corroborating or challenging conclusions with other sources of information.
LAFS.1112.RST.3.8		
10.03.3	Synthesize information from a range of sources (e.g., texts, experiments, simulations) into a coherent understanding of a process, phenomenon, or concept, resolving conflicting information when possible.
LAFS.1112.RST.3.9		
10.04	Range of Reading and Level of Text Complexity		
10.04.1	By the end of grade 11, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] in the grades 11–CCR text complexity band proficiently, with scaffolding as needed at the high end of the range.
10.04.2	By the end of grade 12, read and comprehend literature [informational texts, history/social studies texts, science/technical texts] at the high end of the grades 11–CCR text complexity band independently and proficiently.
LAFS.1112.RST.4.10		
11.0	Methods and strategies for using Florida Standards for grades 11-12 writing in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
11.01	Text Types and Purposes		
11.01.1	Write arguments focused on discipline-specific content.
LAFS.1112.WHST.1.1		
11.01.2	Write informative/explanatory texts, including the narration of historical events, scientific procedures/experiments, or technical processes.
LAFS.1112.WHST.1.2		
11.02	Production and Distribution of Writing		
11.02.1	Produce clear and coherent writing in which the development, organization, and style are appropriate to task, purpose, and audience.
LAFS.1112.WHST.2.4		
11.02.2	Develop and strengthen writing as needed by planning, revising, editing, rewriting, or trying a new approach, focusing on addressing what is most significant for a specific purpose and audience.
LAFS.1112.WHST.2.5		
11.02.3	Use technology, including the Internet, to produce, publish, and update individual or shared writing products in response to ongoing feedback, including new arguments or information.
LAFS.1112.WHST.2.6		
11.03	Research to Build and Present Knowledge		
11.03.1	Conduct short as well as more sustained research projects to answer a question (including a self-generated question) or solve a problem; narrow or broaden the inquiry when appropriate; synthesize multiple sources on the subject, demonstrating understanding of the subject under investigation.
LAFS.1112.WHST.3.7		
11.03.2	Gather relevant information from multiple authoritative print and digital sources, using advanced searches effectively; assess the strengths and limitations of each source in terms of the specific task, purpose, and audience; integrate information into the text selectively to maintain the flow of ideas, avoiding plagiarism and overreliance on any one source and following a standard format for citation.
LAFS.1112.WHST.3.8		
11.03.3	Draw evidence from informational texts to support analysis, reflection, and research.
LAFS.1112.WHST.3.9		
11.04	Range of Writing		
11.04.1	Write routinely over extended time frames (time for reflection and revision) and shorter time frames (a single sitting or a day or two) for a range of discipline-specific tasks, purposes, and audiences.
LAFS.1112.WHST.4.10		
12.0	Methods and strategies for using Florida Standards for grades 11-12 Mathematical Practices in Technical Subjects for student success in Turbine Generator Maintenance, Inspection and Repair.		
12.01	Make sense of problems and persevere in solving them.
MAFS.K12.MP.1.1		
12.02	Reason abstractly and quantitatively.
MAFS.K12.MP.2.1		
12.03	Construct viable arguments and critique the reasoning of others.
MAFS.K12.MP.3.1		
12.04	Model with mathematics.
MAFS.K12.MP.4.1		
12.05	Use appropriate tools strategically.
MAFS.K12.MP.5.1		
12.06	Attend to precision.
MAFS.K12.MP.6.1		
12.07	Look for and make use of structure.
MAFS.K12.MP.7.1		
12.08	Look for and express regularity in repeated reasoning.
MAFS.K12.MP.8.1		

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
14.0	Use turbine generator tooling to maintain and make repairs to Hy-Torq, impact and other hydraulic tools--The student will be able to:			
14.01	Use turbine generator tooling for the following:			
a.	Gas bolt heaters and induction heaters			
b.	Tensioners			
c.	Slugging wrenches			
d.	Torque wrenches including multipliers			
e.	Hydraulic jacks			
f.	Rotor skid pan and rotor blocks			
14.02	Repair and maintain the following:			
a.	Impact wrenches			
b.	Hy-Torq heads 			
c.	Hydraulic pumps			
15.0	Demonstrate application of lubricants and lubricating systems--The student will be able to:			
15.01	Explain the functions of lubrication.			
15.02	Explain the properties of oil lubricants and the factors determining the selection of lubricants.			
15.03	Identify the types, advantages and functions of lubricant additives.			
15.04	Explain a typical turbine generator lube oil system and the various components associated with it.			
15.05	Identify areas of the turbine where grease would be applied and explain why.			
15.06	Explain the types of oil filtration used in turbine generator systems including strainers.			
15.07	Conduct various types of turbine generator oil flushes.			
15.08	Perform a cleanliness analysis of an oil sample. 			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance 5
Course Number: 	9700550
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include tightening operations, removal techniques.  Disassembly and reassembly of high speed turbines and generators along with machine-shop related operations. 

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
16.0	Demonstrate tightening operations on high pressure flanges and cylinders--The student will be able to:			
16.01	Explain the various types of tightening mechanisms that are used on turbine generators and auxiliary components.			
16.02	Explain the materials used for different flange tightening applications based on pressure and temperatures.			
16.03	Use appropriate tools for tightening and measuring tightening mechanisms.			
16.04	Explain the types of gaskets used in turbine generator applications and the advantage and disadvantage of each.			
16.05	Understand gasket compression and demonstrate proper assembly of various types of gaskets including neoprene, Garlock, corrugated metal, serrated and spiral wound.			
16.06	Measure and cut a gasket from a sheet of gasket material.			
16.07	Explain the different types of lubricants utilized on high temperature bolting including advantages and disadvantages.			
16.08	Demonstrate tightening principals including torque and bolt stretch and outside influences on each.			
16.09	Use various tightening tools. 			
17.0	Remove galled bolting and repair of damaged threads--The student will be able to:			
17.01	Determine the best alternative method of removing galled bolting based on the type of material and the location of the fastener.			
17.02	Understand safety requirements before initiating grinding or burning operations.			
17.03	Demonstrate proper setup of cutting torch and demonstrate ability to cut bolting from a cylinder case.			
17.04	Use grinding burrs to remove galled bolting. 			
18.0	Disassemble and reassemble high speed turbines and generators--The student will be able to:			
18.01	Develop a component and parts laydown plan and explain logic for it.			
18.02	Understand all of the various lifting tools and devices used when disassembling a turbine generator.			
18.03	Interpret a rigging and lifting plan.			
18.04	Inspect and identify problems with lifting devices including slings (wire rope, nylon, Kevlar) and hoists/come-a-longs.			
18.05	Use a sling for lifting turbine generator components of various geometries.			
18.06	Understand lifting capabilities of slings and the relationship between angles and stress.			
18.07	Understand the function of a lifting beam and how to set up a load for proper lifting.			
18.08	Understand and demonstrate ability to remove a generator rotor from the stator.			
18.09	Understand necessity and the process for parts tagging and bagging.			
18.10	Understand storage requirements including protection of flange surfaces during outage duration.			
18.11	Understand process for protecting ingress of foreign objects into lubrication and steam systems.			
18.12	Explain rigging and lifting principals.			
18.13	Rig and lift a non-symmetrical turbine component.			
18.14	Disassemble and reassemble a steam piping flange.			
18.15	Use crane signals and demonstrate ability to communicate with team during a lift.			
19.0	Perform machine-shop operations--The student will be able to:			
19.01	Demonstrate safety in performing machine-shop operations.			
19.02	Identify the types of cutting tools.			
19.03	Bore a hole to a specified size.			
19.04	Chase an external V-thread.			
19.05	Identify the different types of work-holding devices.			
19.06	Prepare metal for finishing.			
19.07	Set up, use and adjust an arbor press.			
19.08	Set up, use and adjust a hydraulic press.			
19.09	Set up, use and adjust broaching tools.			
19.10	Cut keyways with an end mill.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Maintenance 6
Course Number: 	9700560
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include the piping and tubing system and the basic operation of a steam turbine and generator.   Perform pump maintenance and repair activities along with preparing for machinery startup operations.

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
20.0	Demonstrate piping and tubing systems--The student will be able to:			
20.01	Identify the components of a piping system.			
20.02	Explain the maintenance considerations of metallic and nonmetallic piping systems.			
20.03	Describe the safety requirements for working with piping and tubing systems.			
20.04	Join copper tubing.			
20.05	Join common fittings.			
20.06	Join metallic piping			
20.07	Bend back-to-back, stub-ups and doglegs in Electrical Metallic Tubing (EMT).			
21.0	Understand basic operation of a steam turbine and generator--The student will be able to:			
21.01	Understand transforming work from high pressure steam.			
21.02	Understand the difference between a reaction and impulse turbine.			
21.03	Understand means of controlling the turbine.			
21.04	Understand the difference between speed control and load control.			
21.05	Understand extraction in a cogeneration facility.			
21.06	Understand the use of overspeed devices.			
22.0	Perform pump maintenance and repair--The student will be able to:			
22.01	Demonstrate the safety procedures for performing pump maintenance.			
22.02	Determine pump capacity and system requirements.			
22.03	Perform pump maintenance.			
22.04	Identify packing and seal requirements.			
22.05	Explain the operating principles of centrifugal, propeller and turbine rotary, reciprocating, diaphragm, positive placement and vacuum pumps.			
22.06	Disassemble and reassemble a pump.			
23.0	Prepare for machinery startup--The student will be able to:			
23.01	Describe the requirements and precautions for machinery startup.			
23.02	Align machinery using wire line, transit, dial indicators, a computer and laser-alignment devices.			
23.03	Position and secure machinery on a foundation.			
23.04	Level machinery and install balance-vibration dampeners.			
23.05	Identify pipe-stress standards for machine-maintenance applications.			
23.06	Perform finish alignment and check for pipe stresses in machinery-maintenance applications.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Mechanic 7
Course Number: 	9700570
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include performing alignment operations and Predictive-Preventive-Maintenance (PPM) technology and how to generate machine improvement and maintenance activities.

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
24.0	Perform measuring and rotor alignment operations--The student will be able to:			
24.01	Demonstrate the safe use of hand tools such as wrenches, files, scrapers, taps, dies, torque wrenches, grinders and cutoff wheels.			
24.02	Use precision measuring devices such as inside and outside micrometers, depth gauges and dial indicators.			
24.03	Read micrometers.			
24.04	Select correct tools for metric and standard fasteners.			
24.05	Explain the types of misalignment and calculate the moves necessary to correct the misalignment.			
24.06	Set up dial indicators to perform a turbine generator coupling alignment check.			
24.07	Perform a Swing Check to align a three bearing unit.			
24.08	Explain the purpose of a tight wire and how it is set up in a turbine.			
24.09	Take measurements from the wire to check alignment of the internal components.			
25.0	Demonstrate Predictive-Preventive-Maintenance (PPM) technologies using a borescope--The student will be able to:			
25.01	Explain the use of infrared thermography.			
25.02	Explain the use of ultrasound technology.			
25.03	Explain the use of advanced alignment techniques.			
25.04	Explain the use of oil ferrography and the types of oil sampling.			
25.05	Describe the safety requirements for PPM technologies.			
25.06	Demonstrate the use of one of the above predictive-maintenance procedures.			
25.07	Plan an advanced PPM schedule.			
26.0	Perform failure analysis--The student will be able to:			
26.01	Conduct/lead a failure analysis meeting to determine the root cause of a failure.			
26.02	Create a failure-analysis form and write a minimum of two different types of failure-analysis reports.			
26.03	Explain the types of bearing failures.			
26.04	Explain the types of shaft fatigues and failures.			
26.05	Explain the types of lubrication breakdowns.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Mechanic 8
Course Number: 	9700580
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include how to generate machine improvements and maintenance activities along with performing failure analysis.  Perform bench work skills along with the non-destructive examination of turbine components.

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
27.0	Generate machine improvements and maintenance management--The student will be able to:			
27.01	Review and critique machinery and base design for improvement, before the equipment is placed on order.			
27.02	Identify the essential elements of effective maintenance management:			
a.	Reward system			
b.	Predictive-preventive maintenance			
c.	Planning			
d.	Work-order systems			
e.	Organizations			
f.	Goals and tracking			
g.	Facilities			
h.	Storerooms 			
i.	Contractors			
j.	Shutdowns			
27.03	Write a report on the design and effective use of at least two of the essential elements of management.			
28.0	Perform bench work skills including breakdown and inspection of control valve components--The student will be able to:			
28.01	Identify and explain the various components of a turbine generator control system including hydraulic and electro hydraulic.			
28.02	Understand the importance and various types of material used for sealing control systems.			
28.03	Prepare for disassembling and inspecting a control mechanism.			
28.04	Understand the importance of cleanliness during the disassembly of a control mechanism.			
28.05	Explain how a control mechanism works and the critical measurement required to assure proper operation.			
28.06	Demonstrate proper removal and installation of hydraulic lines.			
28.07	Demonstrate proper installation and removal of thermocouples.			
29.0	Perform non-destructive examination of turbine components--The student will be able to:			
29.01	Understand the various materials in a steam and gas turbine.			
29.02	Understand the relevant turbine non-destructive examination techniques and how each one is used, including:			
a.	Ultrasonic Testing			
b.	Penetrant Testing			
c.	Magnetic Particle Testing			
d.	Radiographic Testing			
29.03	Identify the proper nondestructive testing technique for various turbine components.			
29.04	Understand the cleanliness standards and cleaning methods required on turbine components.			

2016 – 2017
Florida Department of Education
Student Performance Standards

Course Title: 	Turbine Generator Mechanic 9
Course Number: 	9700590
Course Credit:	1

Course Description:

This course is designed to develop competencies in the areas of turbine generator maintenance, inspection and repair.  These competencies include understanding principles of generator operation and testing, how to troubleshoot hydraulic systems.  Apply vibration-analysis skills and how to perform machinery balancing. 

Abbreviations: 
FS-M/LA = Florida Standards for Math/Language Arts
NGSSS-Sci = Next Generation Sunshine State Standards for Science

Note:  This course is pending alignment in the following categories:  FS-M/LA and NGSSS-Sci.

CTE Standards and Benchmarks	FS-M/LA	NGSSS-Sci	
30.0	Understand principals of generator operation and testing--The student will be able to:			
30.01	Understand basic principal of electrical energy production.			
30.02	Basic understanding of excitation.			
30.03	Understand function of each major generator component: 			
a.	Core			
b.	Rotor/Field			
c.	Stator/Armature			
d.	Exciter			
30.04	Understand the difference in megawatts and KVA.			
30.05	Understand electrical testing.			
31.0	Troubleshoot hydraulic systems--The student will be able to:			
31.01	Explain the safety procedures for troubleshooting hydraulic systems.			
31.02	Read a hydraulic schematic.			
31.03	Install hydraulic components.			
31.04	Connect electrically controlled valves.			
31.05	Explain hydraulic-system troubleshooting techniques.			
31.06	Repair and replace valves.			
31.07	Repair and replace cylinders.			
31.08	Repair and replace pumps and motors.			
32.0	Apply vibration-analysis skills--The student will be able to:			
32.01	Collect vibration data.			
32.02	Interpret vibration data.			
32.03	Determine velocity, acceleration, spike energy, frequency, amplitude and other vibration sources.			
32.04	Describe the safety requirements and precautions for vibration analysis.			
32.05	Operate and use vibration software.			
32.06	Predict and verify the condition of machinery in an industrial setting using vibration tools.			
32.07	Explain the approximately 25 sources of vibration.			
32.08	Explain the bearing frequency formulas.			
32.09	Demonstrate proficiency in vibration detection.			
33.0	Perform machinery balancing--The student will be able to:			
33.01	Describe the safety requirements and precautions for balancing procedures and equipment.			
33.02	Identify the principles of static balancing.			
33.03	Perform a vector balance in the classroom.			
33.04	Identify balancing standards, ISO 1940 or equal.			
33.05	Perform a stand balance in a shop.			
33.06	Perform a field balance in an industrial setting.			
33.07	Use portable or stationary balancing equipment.			
34.0	Understand principals of generator operation and testing--The student will be able to:			
34.01	Understand basic principal of electrical energy production.			
34.02	Basic understanding of excitation.			
34.03	Understand function of each major generator component: 			
a.	Core			
b.	Rotor/Field			
c.	Stator/Armature			
d.	Exciter			
34.04	Understand the difference in megawatts and KVA.			

Additional Information

Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.

Special Notes

The occupational standards and benchmarks outlined in this secondary program correlate to the standards and benchmarks of the postsecondary program with the same Classification of Instructional Programs (CIP) number.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills.  Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.  

Cooperative Training – OJT

On-the-job training is appropriate but not required for this program.  Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply. 

Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the secondary student’s Individual Educational Plan (IEP) or 504 plan or postsecondary student’s accommodations’ plan to meet individual needs and ensure equal access.  Accommodations change the way the student is instructed.  Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems.  Documentation of the accommodations requested and provided should be maintained in a confidential file.

In addition to accommodations, some secondary students with disabilities (students with an IEP served in Exceptional Student Education (ESE)) will need modifications to meet their needs.  Modifications change the outcomes or what the student is expected to learn, e.g., modifying the curriculum of a secondary career and technical education course.  Note: postsecondary curriculum and regulated  secondary programs cannot be modified.

Some secondary students with disabilities (ESE) may need additional time (i.e., longer than the regular school year), to master the student performance standards associated with a regular Occupational Completion Point (OCP) or a Modified Occupational Completion Point (MOCP).  If needed, a student may enroll in the same career and technical course more than once.  Documentation should be included in the IEP that clearly indicates that it is anticipated that the student may need an additional year to complete an OCP/MOCP.  The student should work on different competencies and new applications of competencies each year toward completion of the OCP/MOCP.  After achieving the competencies identified for the year, the student earns credit for the course.  It is important to ensure that credits earned by students are reported accurately.  The district’s information system must be designed to accept multiple credits for the same course number for eligible students with disabilities.

Additional Resources

For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:
http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml